- Datalogic Barcode Scanner Quick Reference Guide

Configuring the Falcon

2-4

Falcon

4400 Series with Windows

Bluetooth Manager

Search for device

1. Select Start > Settings > Control Panel > Bluetooth Manager to open the

Bluetooth control panel.

2. Search for the type of Device(s) you want to connect to by tapping

Printer, Serial, or All. The Falcon will search for Bluetooth Devices

within range.

3. If you attempt to set up a connection when the Bluetooth Radio is

disabled, you will receive a message reminding you that the radio is

turned off, and asking you if you want to turn it on. Tap

Yes if you

need to enable the Bluetooth Radio.

Once searching is complete, Bluetooth Device Profiles will be displayed in the

Discovery tab. You can set up a connection to a device on the list, or clear it

from the list by tapping the

Clear button.

Figure 2-2. Searching for a Bluetooth Device

Connect to a Bluetooth Device

1. From the list of available devices, double tap the one you want to acti-

vate, or select and then tap

Connect.