Falcon® 5500 RFID Mobile Hybrid Computer QRG Addendum
PSC Inc 959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of PSC Inc. or its wholly owned subsidiaries ("PSC").
Table of Contents Overview ......................................................................................................................1 Introduction ............................................................................................................2 Getting Started ..............................................................................................................2 Enabling RFID ...................................................................................................
Table of Contents NOTES ii Falcon® 5500 RFID Mobile Hybrid Computer
Falcon® 5500 RFID Mobile Hybrid Computer Overview This document covers the following topics: Getting Started • Enabling RFID on page 2 • Reading RFID Tags on page 3 Configuration Settings • Audio on page 8 • RFID Settings on page 9 Further Information Addendum • About RFID Tags on page 14 • Configuration Parameters on page 16 • RFID Programming Labels on page 19 • Safety Information on page 27 1
Getting Started Introduction The Falcon 5500 is a Falcon 4420 Windows® CE Color Mobile Computer mounted with a special RFID unit. See the Falcon 4400 Series Quick Reference Guide (QRG) and the Falcon 4400 Series Product Reference Guide (PRG) on the Product CD included with your unit for information not discussed in this RFID Addendum. Information about the symbols and formatting used in this manual are described in the Falcon 4400 Series PRG.
Getting Started 4. In the Pistol Trigger column, select RFID. 5. Tap OK. For information on other RFID configuration options, see Configuration Settings on page 8. Reading RFID Tags For tag read demo purposes: Once you have enabled the Falcon to read RFID tags, complete the following steps: 1. Open an application that accepts keyboard wedge data such as Microsoft WordPad (double-tap the icon on the screen, or go to Start > Programs > Microsoft WordPad).
Getting Started 5. The RFID tag data is entered into the application. 6. When the read is finished, the front LED turns off and a final beep is heard, indicating that the operation is complete. The RFID Antenna (in the RFID unit) should be positioned to face the tag location. Figure 1. Aiming the Falcon 5500 See Configuration Settings on page 8 for information about modifying the default settings. For more details about RFID tags, see About RFID Tags on page 14.
RFID Electrical Considerations RFID Electrical Considerations Operating time Under normal operating conditions, the RFID battery will last longer than the Falcon battery. Extended continuous operation may result in the RFID battery discharging before the Falcon battery. When using “paint” mode, the battery will last approximately 3 hours. If the RFID unit fails to operate or produces error messages on the Falcon screen, it could be an indication that the RFID battery is becoming depleted.
RFID Electrical Considerations LEDs/Indicators RFID Battery Charge LEDs These indicators are visible on the back of the RFID pod. The red LED is on when the unit is in a dock and the RFID battery is charging. The green LED is on when the unit is in the dock and the RFID battery has reached full charge. When the unit is out of the dock, neither LED will be on. Figure 2.
RFID Electrical Considerations Figure 3. Falcon 5500 Dock Falcon 5500 Dock Use only the correct battery chargers and docks with the Falcon 5500 RFID. The technology used for this model is incompatible with other PSC Falcon chargers and docks, including the Falcon 4410/4420 color and monochrome models. Go to the PSC website at www.psc.com for information about models and part numbers.
Configuration Settings Configuration Settings See Configuration Examples on page 12 for samples of optimized settings for different usages. Refer to the Falcon 4400 Series PRG for information about setting other configuration items. Audio 1. Go to Start > Settings > Control Panel. Double-tap the Decoding icon. 2. Select Configure > General > Audio. 3. Choose from the following options: • Volume: Move the slider to raise or lower the audio volume.
Configuration Settings RFID Settings 1. Go to Start > Settings > Control Panel. Double-tap the Decoding icon. 2. Select Configure > RFID. 3. Choose one of the available options. Report Settings In the RFID Decoding Properties, do the following to view or modify Report Settings: 1. Under Decoding Properties, go to Configure > RFID > Report Settings. 2. Report Frequency controls how often RFID tag data is reported to an application.
Configuration Settings Power 1. Under Decoding Properties, go to Configure > RFID > Power 2. Enable/disable Growing Power by selecting the checkbox. When disabled, a constant level of RF power is output when reading tags. When enabled, the level of RF power starts at a minimum level, and then increases to a maximum level, where it will remain for the duration of the painting operation. 3. Set Minimum/Maximum Read using the sliders. • Minimum Power: The minimum RF power level to use for reading tags.
Configuration Settings • New Tag Timeout: The amount of time to wait between tags before painting will automatically stop. This is the maximum amount of time spent waiting for new tags after a tag has been read. If set to Infinite, then painting will stop only when the trigger is released, a Total Read Timeout occurs, or the minimum number of tags have been read. • Minimum Tag Count: This the minimum number of tags to attempt to read.
Configuration Settings Configuration Examples The following examples illustrate ways to optimize RFID settings for specific situations. Reading tagged items from an entire shelf Configuration Item Setting Report Frequency 1 tag Total Read Timeout Infinite Minimum Tag Count Infinite New Tag Timeout Something longer than the time required to move the RFID antenna over all of the tags (for example 10 seconds) 1. Press the trigger and move across the items on the shelf.
Configuration Settings Class 1 Gen 2 Q value Q value sets the number of response slots available for the tags being inventoried (number of slots = 2Q). It is actively managed during an inventory round, but starting with an appropriate Q decreases the time necessary to perform an inventory. Initial Q values should be set to generate 1/3 the number of slots compared to the maximum number of tags expected for a given inventory read attempt.
About RFID Tags About RFID Tags RFID Antenna When attempting to utilize the RFID read functionality of the Falcon 5500 RFID unit it is important to note that the antenna is linearly polarized. This feature requires the tags to be similarly aligned in a planar field to optimize read range and efficiency. Read Range The Falcon 5500 RFID has a functional range of two to six feet.
About RFID Tags Tag Orientation Dual Dipole Antenna Tag Single Dipole Antenna Tag Tags that have a single dipole antenna should be vertically positioned for optimal read performance. Tags with dual dipole antennas are less susceptible to polarization and can be read in either horizontal or vertical alignments to the read plane. Factors Affecting Performance Addendum • Water or water-based products will inhibit (absorb) the signal. • Metal surfaces near the tags may affect performance.
Configuration Parameters Configuration Parameters The following table lists the configuration parameters which have been added to support RFID. For instructions on how to set these parameters, as well as information on all other configuration parameters, consult the Falcon 4400 Series Product Reference Guide (PRG). Code Parameter/ Description I.D. # Type Acceptable Input Defaults (10 seconds) Min Other Controls Label Separator Indicates the label separator.
Configuration Parameters Defaults Code Parameter/ Description I.D. # Type Acceptable Input Min Tag Read Adjusts the pitch of the Beep 0D20 tag read beep frequency. Tone Max Factory 00 - 08 Value (00 = Lowest; 07 = Highest; 08 = User Def.) 00 00 00 00 00 00 'Z' 'Z' 'Z' 00 = 0.07 sec Tag Read Determines the duration Beep of a tag read beep. Duration 0D21 Value 01 = 0.13 sec 02 = 0.18 sec 03 = 0.
Configuration Parameters Defaults Code Parameter/ Description I.D. # Type Acceptable Input Min Total Read Timeout Sets the duration of the read operation before it stops. This only applies to reads started by a physical trigger. New Tag Read Timeout Sets the duration of time when no new tags are read before a read operation stops. Max Factory 00 - 9999 0D2C Value (10 ms increments 00 = infinite) 00 00 00 00 - 9999 0D2D Value (10 ms.
RFID Programming Labels RFID Programming Labels CLASS 0 ENABLE O n * / / 0 D 0 0 1 F F 3 E * O f f * / / 0 D 0 0 0 F F 3 E * * / / 0 D 0 1 0 F F 3 E * * / / 0 D 0 2 0 F F 3 E * * / / 0 D 0 8 0 F F 3 E * * / / 0 D 0 9 0 F F 3 E * * / / 0 D 0 A 0 F F 3 E * CLASS 1 ENABLE O n * / / 0 D 0 1 1 F F 3 E * O f f CLASS 1 GENERATION 2 ENABLE O n * / / 0 D 0 2 1 F F 3 E * O f f TAG READ BEEP ENABLE O n * / / 0 D 0 8 1 F F 3 E * O f f READ POWER MODE G r o w i n g * / /
RFID Programming Labels TAG READ BEEP TONE 0 4 0 0 * / / 0 D 2 0 0 0 F F 3 E * 0 1 * / / 0 D 2 0 0 4 F F 3 E * * / / 0 D 2 0 0 5 F F 3 E * * / / 0 D 2 0 0 6 F F 3 E * * / / 0 D 2 0 0 7 F F 3 E * * / / 0 D 2 1 0 2 F F 3 E * * / / 0 D 2 1 0 3 F F 3 E * 0 5 * / / 0 D 2 0 0 1 F F 3 E * 0 2 0 6 * / / 0 D 2 0 0 2 F F 3 E * 0 3 0 7 * / / 0 D 2 0 0 3 F F 3 E * TAG READ BEEP DURATION 0 2 0 0 * / / 0 D 2 1 0 0 F F 3 E * 0 1 0 3 * 20 / / 0 D 2 1 0 1 F F 3 E * Fal
RFID Programming Labels MINIMUM READ POWER 1 3 % 2 5 % 3 8 % 5 0 % * * * * / / / / / / / / 0 D 2 9 0 1 F F 3 E * 0 D 2 9 0 2 F F 3 E * 0 D 2 9 0 3 F F 3 E * 0 D 2 9 0 4 F F 3 E * 6 3 % * / / 0 D 2 9 0 5 F F 3 E * * / / 0 D 2 9 0 6 F F 3 E * * / / 0 D 2 9 0 7 F F 3 E * 1 0 0 % * / / 0 D 2 9 0 8 F F 3 E * * / / 0 D 2 A 0 5 F F 3 E * * / / 0 D 2 A 0 6 F F 3 E * * / / 0 D 2 A 0 7 F F 3 E * 1 0 0 % * / / 0 D 2 A 0 8 F F 3 E * 7 5 % 8 8 % MAXIMUM READ POWER 1 3
RFID Programming Labels CLASS 1 GENERATION 2 Q 0 0 0 9 * / / 0 D 3 0 0 0 F F 3 E * 0 3 / / 0 D 3 0 0 9 F F 3 E * * / / 0 D 3 0 1 2 F F 3 E * * / / 0 D 3 0 1 5 F F 3 E * 1 2 * / / 0 D 3 0 0 3 F F 3 E * 0 6 1 5 * 22 * / / 0 D 3 0 0 6 F F 3 E * Falcon® 5500 RFID Mobile Hybrid Computer
RFID Programming Labels TOTAL READ TIMEOUT Infinite * / / 0 D 2 C 0 0 0 0 F F 3 E * * / / 0 D 2 C 1 0 0 0 F F 3 E * * / / 0 D 2 C 2 5 0 0 F F 3 E * * / / 0 D 2 C 5 0 0 0 F F 3 E * * / / 0 D 2 C 7 0 0 0 F F 3 E * * / / 0 D 2 C 8 5 0 0 F F 3 E * * / / 0 D 2 C 9 9 9 9 F F 3 E * 10 seconds 25 seconds 50 seconds 70 seconds 85 seconds 99 seconds Addendum 23
RFID Programming Labels NEW TAG READ TIMEOUT Infinite * / / 0 D 2 D 0 0 0 0 F F 3 E * * / / 0 D 2 D 1 0 0 0 F F 3 E * * / / 0 D 2 D 2 5 0 0 F F 3 E * * / / 0 D 2 D 5 0 0 0 F F 3 E * * / / 0 D 2 D 7 0 0 0 F F 3 E * * / / 0 D 2 D 8 5 0 0 F F 3 E * * / / 0 D 2 D 9 9 9 9 F F 3 E * 1000 2500 5000 7000 8500 9999 24 Falcon® 5500 RFID Mobile Hybrid Computer
RFID Programming Labels MINIMUM TAG READ COUNT Inifinite * / / 0 D 2 E 0 0 0 0 F F 3 E * * / / 0 D 2 E 0 0 0 1 F F 3 E * 1 50 * / / 0 D 2 E 0 0 5 0 F F 3 E * * / / 0 D 2 E 0 1 0 0 F F 3 E * * / / 0 D 2 E 0 1 5 0 F F 3 E * * / / 0 D 2 E 0 2 0 0 F F 3 E * * / / 0 D 2 E 0 2 5 0 F F 3 E * 100 150 200 250 Addendum 25
RFID Programming Labels READ REPORT FREQUENCY Inifinite * / / 0 D 2 F 0 0 0 0 F F 3 E * * / / 0 D 2 F 0 0 0 1 F F 3 E * * / / 0 D 2 F 0 0 5 0 F F 3 E * * / / 0 D 2 F 0 1 0 0 F F 3 E * * / / 0 D 2 F 0 1 5 0 F F 3 E * * / / 0 D 2 F 0 2 0 0 F F 3 E * * / / 0 D 2 F 0 2 5 0 F F 3 E * 01 50 100 150 200 250 26 Falcon® 5500 RFID Mobile Hybrid Computer
Safety Information Safety Information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Safety Information NOTES 28 Falcon® 5500 RFID Mobile Hybrid Computer
Safety Information NOTES Addendum 29
Safety Information NOTES 30 Falcon® 5500 RFID Mobile Hybrid Computer
Asia Pacific Italy PSC Hong Kong Hong Kong Telephone: [852]-2-584-6210 Fax: [852]-2-521-0291 PSC S.p.A. Vimercate (MI), Italy Telephone: [39] (0) 39/62903.1 Fax: [39] (0) 39/6859496 Australia Japan PSC Asia Pacific Pty Ltd. North Ryde, Australia Telephone: [61] 0 (2) 9878 8999 Fax: [61] 0 (2) 9878 8688 PSC Japan K.K. Shinagawa-ku, Tokyo, Japan Telephone: 81 (0)3 3491 6761 Fax: 81 (0)3 3491 6656 France Latin America PSC S.A.R.L. LES ULIS Cedex, France Telephone: [33].01.64.86.71.00 Fax: [33].01.
