Industrial PDA with Windows® CE Product Reference Guide
Datalogic Mobile, Inc 1505 Westec Dr. Eugene, Oregon 97402 Telephone: (541) 743-4800 Fax: (541) 743-4900 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Mobile, Inc. or its affiliates or subsidiaries ("Datalogic" or “Datalogic Mobile”) .
Table of Contents Preface: About this Guide ....................................................................................................... i-v How to Use this Manual .........................................................................................................................i-v Document Conventions .......................................................................................................................i-vi Chapter 1. Batteries and Power ...................................
Contents Volume and Sounds ...........................................................................................................................2-25 Wi-FI ...............................................................................................................................................2-26 Using the Summit Client Utility ....................................................................................................2-26 SCU Windows ......................................................
Contents Installing the Handstrap ............................................................................................................... A-8 Handle .............................................................................................................................................. A-8 Installing a Handle on the Pegaso .................................................................................................. A-9 Belt Clip .............................................................
Contents Matrix 2 of 5 ................................................................................................................................... G-15 MSI ................................................................................................................................................ G-17 Pharmacode 39 (Code 32) ................................................................................................................. G-19 RSS-14 ................................................
Preface: About this Guide How to Use this Manual This Product Reference Guide contains comprehensive basic user instructions for the Pegaso Industrial PDA software, batteries, dock, serial cable, data transfer, as well as advanced user information such as bar code configuration and parameters. This section provides an overview of the manual’s contents and organization.
Preface: About this Guide • • • Appendix F, "Programming Parameters", provides the programmable settings for the Pegaso. Appendix G, "Programming Bar Codes", provides bar codes for common setup parameters used to program the Pegaso. Appendix H, "Glossary", is a glossary of terms used in this manual that you may not be familiar with that are specific to Windows®CE and the mobile computer. Registering Your Datalogic Product Datalogic values your feedback.
Document Conventions Key. To differentiate the key on the portable from the Enter key on the PC’s keyboard, portable keys are formatted with “greater than” and “less than” symbols: . Stylus Actions Stylus actions apply to the Pegaso only; most PCs use a mouse as an input device. Tap or Select. Tap the display screen once with the stylus to activate a specific button or select an item from a pull-down list. Double-Tap.
Preface: About this Guide NOTES viii Pegaso™ Industrial PDA with Windows® CE
Chapter 1 Batteries and Power Overview This section contains the following topics: • "Suspend Mode" starting on page 1-1 • "Battery Warnings and Cautions" on page 1-2 • "Battery Disposal" starting on page 1-3. Suspend Mode The Pegaso will go into a suspend or sleep mode when it is idle for a period of time.
Batteries and Power Resuming Use one of the following methods to resume (wake up the Pegaso): • Press to resume (wake up). • Put the Pegaso into a dock. • Press the Scan Trigger to wake up the unit (handled version only). When a battery pack is fully discharged while the unit is in suspend mode, the Pegaso remains in the suspended mode until the battery pack is charged or external power is supplied via the dock or a power cable.
Battery Disposal Always charge the battery at 32°–104°F (0°–40°C) temperature range. Regularly charging near the temperature limits will increase the time necessary to fully charge the battery, and will shorten the battery’s useful life. CAUTION If you remove the battery pack or it becomes completely discharged, there is a 30-minute window in which to insert a charged battery pack before the backup battery fails. If your backup battery completely discharges, the contents of the RAM memory will be lost.
Batteries and Power NOTES 1-4 Pegaso™ Industrial PDA with Windows® CE
Chapter 2 Configuring the Pegaso Overview This section contains the following topics on configuring your Pegaso. Most control panels are accessed by selecting/ tapping Start > Settings > Control Panel.
Configuring the Pegaso Backlight Increasing backlight brightness can cause the battery pack to discharge at a faster rate. The battery discharge rate slows with a decrease in backlight usage. Select Start > Settings > Control Panel > Backlight to open the Backlight control panel. Brightness 1. On the Brightness tab (refer to Figure 2-1), use the slider to adjust the brightness to the desired setting. You can also use the and arrow keys to adjust this setting. 2.
Bluetooth Manager Activation 1. On the Activation tab, just tap the checkbox(es) to enable or disable them (refer to Figure 2-1): • Set the backlight to turn on automatically when any key is pressed or the touchscreen is tapped, either while on battery or external power. • Turn on the backlight when the trigger is pulled. • Deselect Launch Control Panel from the Keyboard to turn off the ability to open the Backlight control panel with a key sequence.
Configuring the Pegaso Figure 2-2. Searching for a Bluetooth Device Connect to a Bluetooth Device 1. From the list of available devices, double tap the one you want to activate, or select and then tap Connect. 2. The resulting dialog will display services that are available on the device. Select the service you want to connect to. The following table shows the icons that display for different types of service. Figure 2-3.
Bluetooth Manager Virtual Port allows you to specify the incoming port, which is used to communicate serially with an incoming device just as if it were a physical COM port. This option is available only if you have selected a Printer or Serial service. You can also select Encrypt or Authenticate from the Bluetooth control panel to apply or modify those settings. 1. To require Authentication, tap the checkbox, then tap OK. 2.
Configuring the Pegaso Table 2-1. Bluetooth taskbar icons Icon Name Description Disabled Icon Indicates that the Bluetooth has been disabled. Unpaired Icon Indicates that the Bluetooth radio is on but the device is currently not paired to another. Paired Icon Indicates that the Bluetooth radio is on and the device is paired with at least one other device. Discoverable Indicates that the device is discoverable by other Bluetooth devices.
Decoding 1. Select Start > Settings > Control Panel > Date/Time. 2. Select the month to open a pull-down list of months or tap the arrow buttons on either side of the month to increase or decrease the month. 3. To change the year, select the year to open a numeric dial. Select the up arrow to increase the value; select the down arrow to decrease the value. Or you can type a new year value in the field. 4.
Configuring the Pegaso Figure 2-5. Decoding Properties: Audio To view other configuration options, select Configure > General from the menu. • Audio: Sets volume, tone, duration, and number of various types of beeps. Figure 2-6. Decoding Properties: General Options • General Options: Select from Label Programming Enable, Symbology IDs, Label Prefix, Label Suffix, and Data Separator options.
Decoding Figure 2-7. Decoding Properties: Decoding Options To view other configuration options, select Configure > General from the menu. • Decoding Options: Set the User ID character associated with a symbology, the Redundancy and select Aggressive Decoding when available. Figure 2-8. Decoding Properties: Devices To view other configuration options, select Configure > General from the menu.
Configuring the Pegaso Figure 2-9. Available 1D Bar Code Symbologies Codabar Pharmacode 39 Code 39 RSS-14 Code 93 RSS-Limited Code 128 RSS-Expanded EAN-13 Standard 2/5 EAN-8 Trioptic Interleaved 2/5 UPC-A Matrix 2/5 UPC-E MSI UPC/EAN Extensions See Appendix G for details on parameters available for each symbology. Refer to the sample symbology control panels in Figure 2-10 for examples of the types of fields and options you can modify.
Device Info Device Info Select Start > Settings > Control Panel > Device Info to view the device serial number, model number, firmware version, and keyboard type. The serial number is also displayed on a label inside the Battery compartment, as shown in Figure 2-11. Figure 2-11. Serial Number Locations Serial Number Display Configuration To change the default Background or Appearance (Windows Color Scheme), select Start > Settings > Control Panel > Display. Background To change the Background image: 1.
Configuring the Pegaso Appearance To change the default Windows color scheme: 1. Tap the Appearance tab. 2. Tap the Scheme pull-down list and select a new Windows color scheme if desired. 3. Tap OK on the control bar, or press on the keypad. Settings To change the Display settings: 1. Tap the Settings tab. 2. Select the desired Rotation using the radio buttons. 3. Change the Resolution by selecting the desired setting. 4. Tap OK on the control bar, or press on the keypad.
Falcon Config 2. Enable or disable error reporting and related features by tapping on the desired selections. 3. Tap OK on the control bar, or press on the keypad. Falcon Config Tap Start > Settings > Control Panel > Falcon Config to access configuration utilities such as the Falcon Management Utility (FMU) and Falcon Desktop Utility (FDU) settings. See "Falcon® Desktop Utility for Windows® CE", starting on page B-1, for complete information on FDU.
Configuring the Pegaso 5. To exit the Soft Keyboard Options, tap OK on the control bar, or press on the keypad. 6. To exit Input Panel settings, tap OK on the control bar, or press on the keypad. Internet Options To change the Internet default settings: 1. Select Start > Settings > Control Panel > Internet Settings. 2. On the General tab (refer to Figure 2-12A), type in the URL of the desired start page and the desired search engine.
Internet Options Figure 2-13. Internet Settings A. B. 5. The Privacy tab (refer to Figure 2-14) allows you to modify the settings by tapping the radio buttons. You can Accept, Block or receive a Prompt for First-party and Third-party Cookies. Enable/Disable session cookies by selecting/deselecting the check box. Figure 2-14. Internet Privacy Settings 6.
Configuring the Pegaso Figure 2-15. Advanced Internet and Popup Settings A. B. 7. The Popups tab provides options for blocking popups, to display notification when popups have been blocked, and to open new pages in the current window. 8. To exit Internet Settings, tap OK on the control bar or press on the keypad. Keyboard Configuration 1. Select Start > Settings > Control Panel > Keyboard Options to open the Keyboard control panel. 2.
Network and Dialup Network and Dialup To change the Network and Dialup connection settings, complete these steps: 1. Select Start > Settings > Network and Dialup Connections. Figure 2-16. Changing the Network & Dialup Connection Settings. 2. Double-tap the connection to view or change the settings. The SDCCF10G1 item shown as an example can vary, depending on the radio installed and the number of connections. 3.
Configuring the Pegaso Owner To change the Owner default settings: 1. Select Start > Settings > Control Panel > Owner Properties. The Input Panel opens to facilitate entering data. 2. Enter data using the input panel or the keypad on the PDA. 3. To exit the Owner Properties control panel, tap OK on the control bar, or press on the keypad. For more information on using the Network ID tab, refer to "Setting up the Network ID" on page 4-8. Password To change the Password default settings: 1.
PC Connection PC Connection The PC Connection control panel determines how ActiveSync works with the PDA. To modify the default settings: 1. Select Start > Settings > Control Panel > PC Connection. 2. Select the first checkbox to enable direct connections to the desktop computer. 3. Tap Change Connection to modify the connection method from USB or Serial. 4. To exit the Change Connection dialog, tap OK on the control bar, or press on the keypad. 5.
Configuring the Pegaso Power Configuration To adjust power management settings, select Start > Settings > Control Panel > Power. Use this control panel to check the charge on the battery or to change the Power settings. Battery Tab The Battery tab provides power indicators for External power, Main battery, and Backup battery as shown in Figure 2-17 on page 2-20. To save your settings, tap OK on the command bar, or press on the keypad.
Regional Settings Regional Settings To change the Regional Settings defaults, select Start > Settings > Control Panel > Regional Settings. 1. Select your locale from the spin box. See Figure 2-18 on page 2-21. 2. Review the Appearance Samples in the bottom half of the screen. Click Customize to change the appearance of Number, Currency, Time, and Date. Figure 2-18. Region and Custom Settings 3. The options on the Language tab are disabled because the Pegaso will display only in English. 4.
Configuring the Pegaso Remove Programs See "Removing Programs" on page 3-7. Storage Manager To change the Storage Manager control panel default settings: 1. Select Start > Settings > Control Panel > Storage Manager. 2. From the Store Info pull-down list, select the desired storage device. 3. You can also format, dismount, and create partitions on storage devices using this control panel. 4. To save and exit the Storage Manager control panel, tap OK on the control bar, or press on the keypad.
Stylus Calibration Figure 2-20. Stylus Properties Control Panel 4. Tap Recalibrate to open the Calibration screen shown to the right 5. Carefully press and briefly hold stylus on the center of the target as the target moves around the screen or press to cancel the stylus calibration. For more information about the touch-sensitive display, refer to “Using the Stylus” and “Navigating the Display” in the Quick Start Guide (QSG).
Configuring the Pegaso System Properties Refer to the System control panel for information related to the system.To view the System properties, select Start > Settings > Control Panel > System Properties. General Tab To view the expansion card settings, select Start > Settings > Control Panel > System Properties > General tab. Memory Configuration RAM Memory Allocation and Usage Complete the following steps to adjust the Memory Allocation (RAM Memory): 1.
Volume and Sounds Device Name Your device uses this information to identify itself to other computers. Copyrights Refer to this tab for specific copyright data. As a user, you are responsible to read this statement. Volume and Sounds To change the Volume and Sound settings, complete the following steps: 1. Select Start > Settings > Control Panel > Volume & Sounds Properties to open the Volume settings.
Configuring the Pegaso Figure 2-21. Volume and Sounds Control Panels 2. Set the volume by adjusting the slider from Soft to Loud. 3. Enable the desired sounds for key clicks, screen taps, notifications, and applications. 4. Select the Sounds tab to choose from various wave files in the menu. 5. You can listen to the sound by selecting Preview. 6. Save your new sound scheme by selecting Save As and entering a name for your new Sound Scheme in the field. Delete a sound scheme by tapping Delete. 7.
Wi-FI To initialize SCU: 1. Go to Start> Settings > Control Panel. 2. Tap on the Wi-fi icon. SCU Windows SCU has five tabs: Main, Profile, Status, Diags (Troubleshooting), and Global Settings. Tabs enable easy navigation. Each tab is described in more detail in this section. Main Tab Reference Figure 2-22 on page 2-27 to view the features of the Main tab. • Enable/Disable Radio: Select or deselect to enable or disable the radio. • Active Profile: Displays the name of the active configuration profile.
Configuring the Pegaso Figure 2-23 on page 2-28 is an example of a Profile tab. Here are the highlights: • Profile: Use to select the profile to be viewed or edited. If “ThirdPartyConfig” is selected then, after the device goes through a power cycle, WZC is used for configuration of the radio.
Wi-FI • Encryption: Specifies the type of key used to encrypt and decrypt transmitted data and how that key is specified or derived. Encryption options include: - WPA2 or WPA with dynamic keys (derived from the EAP authentication process) - WPA2 or WPA with pre-shared keys - Static WEP keys Consult the Summit User’s Guide for details on all profile settings, including security settings. Status Tab The Status tab shown in Figure 2-24 on page 2-29 provides status information on the radio.
Configuring the Pegaso Figure 2-25. Diags tab, with ping active Ping address Ping results Here are the functions available on the Diags tab: • (Re)connect: Disable and enable the radio, apply or reapply the current profile, and attempt to associate and authenticate to the wireless LAN, logging all activity in the output area at the bottom. • Release/Renew: Obtain a new IP address through DHCP release/renew, and log all activity in the output area at the bottom.
Wi-FI Figure 2-26. Global Settings The default setting for each global setting ensures reliable operation in most environments. Consult the user’s guide for details on all global settings.
Configuring the Pegaso NOTES 2-32 Pegaso™ Industrial PDA with Windows® CE
Chapter 3 Software Applications Overview This section contains the following topics: • "Inbox" starting on page 3-2. • "Internet Explorer" starting on page 3-2. • "Media Player" on page 3-3. • "WordPad" starting on page 3-3. • "Persistent Memory" starting on page 3-4 • "Installing Programs" starting on page 3-5. • "Using an Installation Wizard" starting on page 3-6. • "Installing Programs Manually" on page 3-6. • "Using Windows Explorer to Add to the Start Menu" on page 3-7.
Inbox The Pegaso comes with Inbox for Windows CE installed from the factory. Inbox is a familiar Microsoft email interface. To set up your Inbox: 1. Open Inbox by selecting Start > Programs > Inbox. 2. Select Services > Options from the command bar to configure email. 3. Drag the screen to show Add.... Select Add.... 4. Select the Service Type and type the email service name in the Service Name text box. Select OK. 5. Enter the server and user information in the Mail Service Definition. 6.
Media Player Internet Explorer uses sliding menus for application and navigation control. Tap and drag the sliding menus to the left or right to see the hidden menu items and toolbars. To achieve more screen real estate in Internet Explorer, you can hide the Status bar and View menu. From the top menubar, go to View > Hide Toolbars. Once it is hidden, you must reset the Pegaso to access these features again. Refer to the Pegaso Quick Start Guide (QSG) for reset instructions.
Persistent Memory In addition to the RAM-based storage standard on Windows CE terminals, the Pegaso is also equipped with a persistent storage application and file storage area. The persistent storage memory persists across all reset (warm/cold reboot) conditions and software/firmware updates. Because of this, Datalogic very strongly recommends installing all applications, applets, programs, and important data files to the persistent disk of the Pegaso.
Installing Programs Disk Size The size of the persistent storage disk will vary, depending upon several factors, such as the size and number of currently running applications and the amount of memory currently consumed by the OS. To view the current size of flash memory: 1. Double-tap the My Device icon on the desktop. (See Figure 3-1). 2. Press and hold the FlashDisk directory with the stylus, and select Properties from the pop-up menu. 3. The FlashDisk Properties dialog opens.
Using an Installation Wizard If the file has an installer, the installation wizard begins automatically if you have ActiveSync installed. Most installation programs require an ActiveSync connection. (Refer to "Installing & Setting Up Microsoft ActiveSync" on page 4-1.) Follow the directions on the screen. Once the software is installed on your desktop computer, the installer transfers the software to your Pegaso.
Removing Programs Using Windows Explorer to Add to the Start Menu 1. Select Start > Programs > Windows Explorer, and select the directory where the application or program is stored. 2. Select Cut from the Edit menu. 3. Open the Programs folder located in the Windows folder, select Paste from the pop-up menu. The program appears on the menu. Using ActiveSync to Add to the Start Menu 1. Use the Explorer in ActiveSync on your desktop computer to explore the files on your Pegaso and locate the program.
Firmware Update Utility The Pegaso is equipped with a field upgradeable firmware mechanism. Firmware updates for the Pegaso are uploaded to the Datalogic Mobile website (www.mobile.datalogic.com). After you have downloaded the desired update, there are several ways you can update the firmware on the Pegaso. • Use the Falcon Management Utility (FMU) if you have multiple units to update. Refer to the FMU User’s Guide on the Product CD included with your Pegaso for more information.
Firmware Update Utility To install Datalogic Mobile’s Falcon® Firmware Update Utility, complete the following steps on the PC: 1. Insert the CD shipped with your Pegaso and click on the link to Firmware Update Utility. OR Go to the Datalogic Mobile website at www.mobile.datalogic.com and download the most current version of the Firmware Update Utility. Unzip the file, then double-click to run FUU_Setup.exe. Click OK to continue once you have removed previous versions of FUU. 2.
Updating the Pegaso Firmware After copying the firmware image to the host PC ("Retrieving a Firmware Image Update" on page 3-8) and installing FUU ("Installing FUU on the Host PC" on page 38), you can upgrade the firmware on your Pegaso. The following steps require that you have already established an ActiveSync connection between the host computer and the Pegaso.
Firmware Update Utility 7. FUU will compare the selected firmware image with the firmware already loaded on the Pegaso; if the images are different, FUU will proceed to update the firmware image on your Pegaso. Please be patient and do not remove the Pegaso from the Dock during this procedure. The firmware image of the Pegaso can take as long as: • 6 minutes to download using a USB connection. • 22 minutes to download using a serial connection with 115K baud rate.
6. Click Update Terminal on FUU on the host PC. 7. FUU will restore the firmware on the Pegaso as shown on page 3-10. Please be patient and do not remove the Pegaso from the Dock during this procedure. The firmware image of the Pegaso can take as long as: • 6 minutes to download using a USB connection. • 22 minutes to download using a serial connection with 115K baud rate. • 130 minutes to download using a serial connection with 19.2K baud rate. 8.
AutoStart Table 3-3. PreAuto.ini and Autostart.ini location Product Operating System Windows CE Windows Mobile F4400 Location \FlashFX Disk \FlashDisk Installing CAB files Copy any CAB files you want to install into the AutoStart CAB folder. These CAB files will then be automatically installed in alphabetical order the next time you start the device.
Example: “File.cab” should be renamed “File_.cab” to force AutoStart to not install the CAB in silent mode. This specially-named CAB file should be placed in the AutoStart folder with other CAB files intended for installation on the next reboot. Autostart.ini Autoexec.ini, which uses AutoCE on some older models, has been deprecated. These files should be renamed to Autostart.ini and reformatted as described in "AutoStart" on page 3-12. In the following section, all references to AutoStart.
AutoStart Table 3-6. Options for Autostart.ini and PreAuto.ini Description Character Comment: This line will not be ‘#’ OR ‘ ‘ executed. (space) Comments This may only be used as the first character of the line. If the comment option is specified in the options elsewhere, it is ignored. Do not wait on line completion: This will cause the line to exe‘-’ cute and immediately move onto the next line. Query: Request user confirmation when running the execut- ‘?’ able.
Table 3-7. AutoStart Query options Field Line Number Exe Args Description This is the line number in the script being executed. The executable as parsed by AutoStart. The argument as parsed by AutoStart. The fields may be broken up into multiple lines (as shown in the example) due to limited space in the dialog. Parentheses are used to surround the given field and make it very clear what the value of the field is. Table 3-8 describes the results of each choice: Table 3-8.
Chapter 4 Networks, Communications, and Connections Overview This section contains the following topics: • "Installing & Setting Up Microsoft ActiveSync" starting on page 4-1. • "Installing Microsoft ActiveSync" on page 4-1. • "Setting up ActiveSync" on page 4-3. • • • "Installing the USB Driver" on page 4-4. "Using ActiveSync" starting on page 4-5. "Networking" starting on page 4-8. • "Setting up the Network ID" starting on page 4-8. • "Network and Dialup Connections" starting on page 4-8.
Networks, Communications, and Connections To install Microsoft® ActiveSync on the PC, complete the following steps: 1. Go to the Microsoft® Windows website at http://www.microsoft.com/downloads/. 2. Use the Product/Technology pull-down list to search on “ActiveSync” for the most current version. 3. Download the current version of ActiveSync from the Microsoft website. 4. Install the most current version of Microsoft® ActiveSync on the host PC (refer to Figure 4-1). Figure 4-1.
Installing & Setting Up Microsoft ActiveSync 5. Click Next to continue the installation. Click Cancel to cancel the installation of ActiveSync. Figure 4-3. Microsoft ActiveSync Installer 6. Reboot your PC. 7. You have completed installing ActiveSync. Setting up ActiveSync 1. Open ActiveSync from the Host PC. 2. Connect the Pegaso to the Host PC via a dock or USB/Serial cable. 3. Verify that the Pegaso is turned on. 4.
Networks, Communications, and Connections • Double-click and open ActiveSync from the Host PC’s System Tray if it is not already open. • Remove the Pegaso from the dock and then reinsert it into the dock or disconnect the cable from the Host PC and reconnect it. • Select File > Get Connected for ActiveSync to look for a mobile device. • Go to File > Connection Settings and make sure that your Connection Settings dialog show the same selections as that in Figure 4-5 below if you have a USB connection.
Using ActiveSync 1. Copy the USB driver file from your Pegaso CD or the Datalogic website to the following location on your computer: C:\Program Files\Microsoft ActiveSync\Drivers. 2. Connect the USB or Serial cable to Pegaso or place the unit in the dock. 3. Connect the USB or Serial cable to a Host PC. 4. Follow the directions onscreen. The specified source directory will be the one identified in step 1. 5. You are now ready to use ActiveSync.
Networks, Communications, and Connections Figure 4-6. ActiveSync Dialog 4. Navigate to the target directory (folder) on your portable. Figure 4-7. Exploring the Mobile Device 5. Copy the desired file by using the Copy/Paste method or dragging and dropping the desired file(s) into the directory (folder). Depending on the file type, ActiveSync may convert the file into a format appropriate for the Windows CE device.
Using ActiveSync Figure 4-8. File Synchronization Options 3. Place the file to be synchronized in the Synchronization folder created in your My Documents directory (defaults to the desktop). Refer to Figure 4-7 on page 4-6. During the ActiveSync connection, all files in the Synchronization folder will be synchronized with (copied to) the \My Documents directory on the Pegaso. Figure 4-9.
Networks, Communications, and Connections Networking Setting up the Network ID To set up your Network ID (configure the Windows user settings, such as the user name, password, and domain), complete the following steps on the Pegaso: 1. Go to Start > Settings > Control Panel > Owner. 2. Select the Network ID tab on the Owner Properties dialog box. 3. Enter your User Name, Password, and Domain on the Network ID tab. 4. Select OK on the command bar to save your network ID information.
SNMP Network Setup: Remote ActiveSync To execute a Remote ActiveSync, complete the following steps: 1. Go to Start > Programs > Communication > Netlink. 2. Select the target host to which you wish to connect in the Connect To field. 3. Tap Connect. 4. A network ActiveSync connection will be established. Network functions and operations work the same when using the Dock. You must have established an ActiveSync partnership with a host before you can use Remote ActiveSync to connect to it.
Networks, Communications, and Connections NOTES 4-10 Pegaso™ Industrial PDA with Windows® CE
Appendix A Accessories Overview This appendix covers the following topics: "Power Supplies" on page A-2.
Accessories Power Supplies Powered USB Cable & Power Supply Use only the correct battery chargers and docks with this Windows CE Pegaso. The technology used for these models is incompatible with other Datalogic chargers and docks. Figure A-1. Power Supply and Powered USB Cable Battery Pack The Battery Pack and the Battery Door are integrated and are not sold separately. The Pegaso is available with either a standard or high-capacity battery.
Power Supplies Figure A-2. Battery Pack Battery Pack Battery Latch (push in to release) Seat this end first Single Slot Dock Figure A-3.
Accessories Four-Slot Charge Dock The Four-Slot Charging Dock provides the ability to charge up to four Pegasos and four spare batteries simultaneously. Figure A-4. Four-Slot Charge Dock Four-Slot Ethernet Dock Like the Four-Slot Charging Dock, the Four-Slot Ethernet Dock provides the ability to charge four Pegaso and four spare batteries simultaneously. In addition, the built-in Ethernet hub gives all the docks a unique Ethernet address accessible through one physical 802.3 CAT5 connection.
Power Supplies Four-Slot Battery Charger Charge up to four spare battery packs simultaneously with the Four-Slot Battery Charger. Figure A-6. Four-Slot Battery Charger LEDs Car Charging Adapter A Car Charging Adapter is available for the Pegaso. To attach, just plug the adapter into the connector on the bottom of the unit, and tighten the thumb screws to secure it. Figure A-7.
Accessories Modem Module An optional Modem Module allows you to use the Pegaso to dial a server in a remote office. Features: • V.92/56K data rate backward compatible with lower speeds • V.44 and V.42 bits data compression • V.42 error correction • AT command compatible • U. S. Caller ID reporting • FastPOS (V.29) and V.22vis Fast Connect • V.80 Synchronous Access • Built-in speaker • Easy to use To connect: 1. Remove the Pegaso from the dock and detach power from the dock. 2.
Ethernet Module 8. Click on TCP/IP Settings and Security Settings and fill in as needed to connect to the remote server. Check with your network administrator for settings. Tap Finish when complete. 9. Double tap the newly named connection. 10. Fill in the necessary username, password, and domain. 11. Tap Connect to continue. A PPP connection has now been created. TCP/IP network communications can commence. Ethernet Module The optional Ethernet Module allows the Pegaso to connect to an Ethernet network.
Accessories Figure A-8. Removing/Replacing the Handstrap Upper Handstrap Assembly Closure Area Handstrap Back Enclosure Handstrap Holder Installing the Handstrap To install a Handstrap on the Pegaso, follow the steps described below. 1. Feed the strap end of the handstrap down through the Back Enclosure Handstrap Holder slot as shown in Figure A-8 and loop it up to engage the closure area at the desired position. 2. Attach the Upper Handstrap Assembly to the unit using the two Phillips screws.
Handle Installing a Handle on the Pegaso The handle may be installed without removing the handstrap. To install the handle on the Pegaso, complete the following steps: 1. Align the “ears” on the handle with the corresponding holes on the underside of the Pegaso and slide them into place. Ears 2. Seat the top of the Handle against the Pegaso and turn the quarter-turn fastener to secure the Handle to the unit.
Accessories Belt Clip The Handstrap can be left on when installing the Belt Clip. The Belt Clip comes with two separate pieces: one that attaches to the Pegaso, and one that attaches to your belt. To install the Belt Clip on the unit, complete the following steps: 1. Turn the Pegaso face-down and ensure that power is off. 2. Orient the Belt Clip on the underside of the Pegaso. 3.
Belt Clip Figure A-9. Installing the Belt Clip 1/4 Turn Latch Locked Position Unlocked Position Belt Clip Attaching to a Belt To attach the Pegaso to a belt, snap the Belt Attachment onto your Belt. Slide the Pegaso onto the Belt Attachment sideways, then rotate to an upright position to secure it into place, as shown in Figure A-10. Figure A-10.
Accessories Screen Protector A Screen Protector is available for the Pegaso. Use the following instructions to attach a Screen Protector. You may find it helpful to have the unit firmly seated in its dock while performing these procedures. Another useful tip is to have a credit card handy to assist in smoothing the Screen Protector in place. 1. Gently but thoroughly clean the touchscreen using a lens cloth or other soft, lint-free cloth.
Appendix B Falcon® Desktop Utility for Windows® CE Overview Falcon® Desktop Utility (FDU) allows Datalogic Pegaso™ Windows® administrators to configure Pegaso Windows® CE devices to control individual user access. This includes: • Prevent users from changing Pegaso OS settings. • Define keys to access specific functionality/programs. • Use Application Selector to replace desktop with a selection of authorized applications.
Falcon® Desktop Utility for Windows® CE Falcon Desktop Utility To open the FDU for the first time, select Start > Settings > Falcon Config. Figure B-1. Accessing FDU These options are available from all screens: Table B-1. Options Available on all Screens Command B-2 Description OK Tap OK to apply the settings and modifications you have made in the FDU tabs. OK saves every modification. X Tap X to cancel the settings and modifications you have made in the FDU tabs.
Falcon Desktop Utility Administrative Options When you open the Admin control panel, the FMU tab will open. Select the Admin tab to set up FDU. Figure B-2. Setting a Password/Admin Tab Fields Table B-2. Setting a Password/ Admin Tab Fields Command Description Select/tap this checkbox to activate the FDU functions such as Enable Falcon Hot Key assignments, IE Restrictions, Windows Settings, and the Desktop authorized application menu. Enter a password in the text box.
Falcon® Desktop Utility for Windows® CE Setting a Password To set a password: 1. Enter a password in the field. This allows the user to specify a password when this utility is launched. By default there is no password set. Be sure to record the Password for future reference. 2. Re-enter the password in the second field. 3. Select/tap Set Password to enable the password. 4. Select/tap OK close the Set Password Confirmation dialog.
Falcon Desktop Utility Figure B-3. Setting a Password Table B-3. Setting a Password Dialog Command Description Enter Password Enter your password using the keypad, or using the stylus on the soft input panel (SIP) in the text box. OK Select/tap OK to accept the password. X Select/tap X to cancel the request to start the FDU. Complete the FDU Config dialog: 1. Type in your password using either the keypad on the unit, or using the stylus on the soft input panel (SIP).
Falcon® Desktop Utility for Windows® CE Figure B-4. Hot Keys Tab Table B-4. Hot Keys Tab Fields Command Description Hot Key This pull-down list displays the available function keys to define. Select the desired one from the list. New Select/tap to specify a new Hot Key, not on the Hot Key list. This opens a new dialog, shown on page B-7. Delete Tap to delete the selected Hot Key. You can only delete the Hot Keys you have added. You cannot delete -.
Falcon Desktop Utility Table B-5. Pegaso Hot Keys Available Pegaso 19-key models Numeric F1-F10 Alpha keys Side/top triggers The administrator is responsible for verifying that these keys don’t override existing functions. To prevent FDU Hot Keys from overriding existing application keys, select “No Action” in the Action combo box. Adding a New Hot Key When you select New on the HKeys tab, this opens the Add New Hot Key dialog box. To define a new Hot Key, complete the following steps: 1.
Falcon® Desktop Utility for Windows® CE Make sure you do not attempt to add a Hot Key that is already defined. 3. Select/tap OK to save the New Hot Key. If you select/tap X, the key will not be saved. It is possible for the keyboard wedge to activate assigned Hot Keys using alphanumeric characters. Bar codes containing characters associated with assigned Hot Keys will trigger the action or application assigned to that Hot Key.
Falcon Desktop Utility Command Description Select/tap to set a specified error page as the default. A confirAssign as Default mation dialog opens to ask if the default error page applies to all errors. Browse Select/tap to browse for files. Show Address Bar Select/tap this check box to show the IE address bar. Show Tool Bar Select/tap this check box to show the IE toolbar. Show Status Bar Select/tap this check box to show the IE status bar.
Falcon® Desktop Utility for Windows® CE Figure B-7. Windows CE Desktop and Win Tab WinCE Desktop Start Menu Taskbar Table B-8. Win Tab Fields Command Description Show Taskbar Select/tap Show Taskbar to specify that the taskbar is shown or hidden. Taskbar Enabled Select/tap Taskbar Enabled to specify whether the taskbar is accessible. This option is only available when the Show Taskbar is checked. Select/tap Start Menu Enabled to specify whether the Start Start Menu Enabled menu is accessible or not.
Application Selector Application Selector Use the Application Selector (AppSelect Tab) function to edit, add, or delete applications for the application selector. Figure B-8. AppSelect Tab Table B-9. AppSelect Tab Fields Command Enable Application Selector Description Select/tap Enable Application Selector to enable/disabled the application selector. When this is enabled, the Application Selector replaces the desktop and allows only authorized use of applications.
Falcon® Desktop Utility for Windows® CE Figure B-9. Add Application Dialog Table B-10. Add Application Dialog Command Description Application Title Type the name of the application in this textbox in the way you wish it to appear for the user. Executable Displays the path for the executable file which you want to run. Browse Select/tap to browse for the desired executable file. The results of this search are placed in the Executable textbox.
Application Selector Application Selector The administrator can choose for the user to have access to the desktop or not. The Application Selector can replace the desktop and limit the user to the specified list of applications. Figure B-10. Application Selector The user can select/tap the desired application. The administrator can customize this list as shown in "Application Selector" on page B-11.
Falcon® Desktop Utility for Windows® CE NOTES B-14 Pegaso™ Industrial PDA with Windows® CE
Appendix C Configuring the Web Server Overview The Web Server can perform several different actions, including generating a web page containing statistics relating to performance of the mobile computer. The Web Server can also be used for creating an interface for interaction with the Terminal to configure system behavior. This section contains the following topics on configuring the Web Server: • "Enabling the Web Server" below. • "Testing the Web Server" on page C-3.
Configuring the Web Server 5. To restart the Web Server, type: \> services refresh HTP0: This will cause the Web Server to reload any information pertaining to the Web Server in the registry. For additional information on the registry entries, see "Web Server Registry Settings" on page C-4. To configure the Web Server to allow access to the Web and Net administration pages: 1.
Testing the Web Server 9. Click Return to user configuration page to return to the User Manager Setup page. The new group will appear below the Group Name box on the User Manager Setup page. 10. Click Modify beside the Group Name box containing Testgroup. The Group Configuration page appears. 11. Select the check box in the Member of group? column for Testuser, and then click Submit Changes. You have now added Testuser to the Testgroup group.
Configuring the Web Server 8. Click Return to the Default Website configuration page. The Default Website page appears. 9. Click Configure the Administrative Users for this Website. The Administrative Users page appears. 10. Select Enabled for Testuser, and then click Update. A message telling you that your modifications have been saved and asking you to restart the Web Server appears at the top of the page. 11. To restart the Web Server, select Restart Web Server from the menu bar.
Creating and Using an ISAPI Service Setting the "a" value to zero (0) enables anonymous users to have access to all files in the virtual directory. This potentially opens the device up to hackers. Setting this value to zero (0) is permissible for internal development and testing purposes. However, you should never ship a Web Server device with the "a" value set to zero (0) for any configuraCAUTION tion page.
Configuring the Web Server NOTES C-6 Pegaso™ Industrial PDA with Windows® CE
Appendix D SNMP Interface Overview SNMP Concepts Simple Network Management Protocol (SNMP) is a standardized protocol for network management services using a client/server model. The network management program (client) issues queries and commands to the remote device (agent/server). The protocol itself defines a number of variable types and structures, and the rules for using them for data transfer.
SNMP Interface The format of an MIB follows rules laid out in the appropriate standards, allowing the manufacturers of network management tools such as HP OpenView and CastleRock SNMPc to make use of the MIBs developed by manufacturers. So by following the procedures used by the management tool, the MIB can be processed by the tool allowing the proper display of SNMP values retrieved from the agent.
Appendix E Cable & Connector Configurations Introduction The following pages contain information about standard interface cables for use in interconnecting the Dock to power and/or peripheral devices. General Specifications Wire Requirements • • Cable length should not exceed 15 feet. Wire gauge: 5V and GND — 26 AWG min, 24 AWG recommended. All others 28-26 AWG. Supply Voltage Current power supply voltage = 5V, 3 amp. Docking Connector Table E-1.
Cable & Connector Configurations PIN Signal 12 13 14 15 16 CTS DTR DSR NC POWER IN Description RS232 CTS (Input to Mobile Computer) RS232 DTR (Output from Mobile Computer) RS232 DSR (Input to Mobile Computer) No Connect Power Into Mobile Computer USB Cable Figure E-1 illustrates the connector configuration of the USB cable for the Pegaso. Figure E-1.
Appendix F Programming Parameters Overview This section contains information about programmable settings for the Pegaso with Windows CE. Use the Falcon Management Utility (FMU), the Decoding Control Panel applets, or the bar codes provided in Appendix G to program the Pegaso. Table F-2 starting on page F-3 provides the following information: • • • • • Code Parameter is the “human” name for the programming option. I.D. # is the “decoder” name for the programming option.
Programming Parameters Programming Codes Without Parameters The following table describes the functions of special bar codes that take no parameters: Table F-1. Programming Codes Without Parameters F-2 Code Parameter I.D. # Function Defaults Minimum FF39 Defaults Maximum FF3A Defaults Factory FF3B Defaults Registry FF3C Exit and Restore FF3D Exit and Save FF3E Exit and Commit FF3F Turns every On/Off parameter off and sets all minimum and Maximum Label Lengths to the lowest values.
Bar Code Parameters Bar Code Parameters The following table lists the standard customer programmable settings for the Pegaso. Table F-2. Programmable Standard Bar Code Settings Code Parameter/ Description I.D. # Acceptable Input Codabar Defaults Min Max Factory Enter 1 for On and 0 for Off. Enable Enables/disables the Codabar symbology. 0300 On / Off Off On On Enable Aggressive Decoding Enables more aggressive decoding algorithms to be used in order to scan hard to read labels.
Programming Parameters Code Parameter/ Description I.D. # Acceptable Input Code 39 Defaults Min Max Factory Enter 1 for On and 0 for Off. Enable Enables/disables the Code 39 symbology. 0100 On / Off Off On On Enable Aggressive Decoding Enables more aggressive decoding algorithms to be used in order to scan hard to read labels. 0101 On / Off Off On Off Enable Checksum Requires the use of checksum characters to verify a bar code.
Bar Code Parameters Code Parameter/ Description I.D. # Acceptable Input Defaults Min Max Factory Maximum Label Length This feature specifies the maximum allowable length of a Code 93 label. The length includes check and data characters. Maximum Label Length should be greater than or equal to Minimum Label Length. 0421 01 - 50 01 50 20 Read Verification Sets the number of times a label must be read before it is transmitted.
Programming Parameters Code Parameter/ Description I.D. # Acceptable Input European Article Numbering-13 (EAN13) Defaults Min Max Factory Enter 1 for On and 0 for Off. Enable Enables/disables the EAN-13 symbology. 0510 On / Off Off On On Enable Aggressive Decoding Enables more aggressive decoding algorithms to be used in order to scan hard to read labels. 0511 On / Off Off On Off Send Check Digit Includes a check digit in the label which is transmitted.
Bar Code Parameters Code Parameter/ Description I.D. # Acceptable Input Defaults Min Max Factory Send Check Digit Instructs the terminal to include the check digit in the label transmission. 051A On / Off Off On Off Convert EAN8 to EAN-13 Instructs the decoder to expand EAN-8 labels to their EAN-13 equivalents. Any EAN-13 parameters will then apply to the result. 051B On / Off Off On Off Read Verification Sets the number of times a label must be read before it is transmitted.
Programming Parameters Code Parameter/ Description User ID I.D. # Specifies the symbology identifier (if any) that is sent by the decoder when parameter Send Code ID (Index 0025) is set to 3. "ASCII" code zero (null) is used to indicate that an identifier is not to be sent for the symbology. 022B Acceptable Input Any single ASCII character (00 = Off) Matrix 2 of 5 Defaults Min Max Factory 'B' 'B' 'B' Enter 1 for On and 0 for Off. Enable Enables/disables the Matrix 2 of 5 symbology.
Bar Code Parameters Code Parameter/ Description I.D. # Acceptable Input Defaults Min Max Factory Send Check Digits This instructs the decoder to include any enabled check digit(s) in the label which is transmitted. 060B On / Off Off On Off 2nd Check Digit Mod 11 Instructs the decoder to interpret any second MSI check digit as modulo 11 instead of modulo 10. 060C On / Off Off Off Off Minimum Label Length Set the minimum label length to be less than or equal to maximum label length.
Programming Parameters Code Parameter/ Description I.D. # Acceptable Input Defaults Min Max Factory If RSS-14, RSS-Expanded, RSS-Limited, or RSS-Composite symbologies are enabled for UCC-EAN 128, then that setting is also enabled for all other RSS symbologies. NOTE: For the 2D Imager, RSS-Expanded User Code ID is used for RSS-14 RSS Limited Enter 1 for On and 0 for Off. RSS Limited Enable Enables/disables the RSS Limited symbology.
Bar Code Parameters Code Parameter/ Description I.D. # Acceptable Input Standard 2 of 5 Defaults Min Max Factory Enter 1 for On and 0 for Off. Enable Enables/disables the Standard 2 of 5 symbology. 0200 On / Off Off On Off Enable Aggressive Decoding Enables more aggressive decoding algorithms to be used in order to scan hard to read labels.
Programming Parameters Code Parameter/ Description User ID I.D. # Specifies the symbology identifier (if any) that is sent when parameter Send Code ID (Index 0025) is set to 3. "ASCII" code zero (null) is used to indicate that an identifier is not to be sent for the symbology 0125 Acceptable Input Any single ASCII character (00 = Off) Universal Product Code-A (UPC-A) Defaults Min Max Factory 'X' 'X' 'X' Enter 1 for On and 0 for Off. Enable Enables/disables the UPC-A symbology.
Bar Code Parameters Code Parameter/ Description I.D. # Acceptable Input Defaults Min Max Factory Convert UPCE to UPC-A Instructs the decoder to expand UPC-E labels to their UPC-A equivalents. Any UPC-A parameters will then apply to the result. 050C On / Off Off On Off Read Verification Sets the number of times a label must be read before it is transmitted.
Programming Parameters Table F-3. Other Controls Code Parameter/ Description I.D. # Acceptable Input Other Controls Enable Label Programming F-14 Defaults Min Max Factory Enter 1 for On and 0 for Off. Enables/disables the ability to perform label programming. FF00 On / Off On On On 07 07 07 Beeper Volume Adjusts the beeper volume. FF20 00 = Off 00 - 09 (01 = Lowest; 07 = Highest; 08 = Higher; 09 = Lower) Long Range Trigger Mode Selects the Long Range Trigger mode.
Bar Code Parameters Code Parameter/ Description Label Prefix Label Suffix Indicates a label prefix. Indicates a label suffix. Defaults Acceptable Input I.D. # Min Max Factory 0026 Any single ASCII character (00 = Off) Non e Non e None 0027 Any single ASCII character (00 = Off) CR CR CR Table F-4.
Programming Parameters F-16 ASCII Hex ASCII Hex ASCII Hex ASCII Hex DC2 12 2 32 R 52 r 72 DC3 13 3 33 S 53 s 73 DC4 14 4 34 T 54 t 74 NAK 15 5 35 U 55 u 75 SYN 16 6 36 V 56 v 76 ETB 17 7 37 W 57 w 77 CAN 18 8 38 X 58 x 78 EM 19 9 39 Y 59 y 79 SUB 1A : 3A Z 5A z 7A ESC 1B ; 3B [ 5B { 7B FS 1C < 3C \ 5C | 7C GS 1D = 3D ] 5D } 7D RS 1E > 3E ^ 5E ~ 7E US 1F ? 3F _ 5F DEL 7F Pegaso™ Industria
Appendix G Programming Bar Codes Overview This appendix provides bar codes for common setup parameters for programming the Pegaso. Factory default settings are OUTLINED. To make settings that are not provided in the chapter, you can design custom bar codes or use the Falcon Management Utility (FMU) to program the Pegaso. Refer to "Configuring the Pegaso", on page 2-1. 1D Symbologies Symbologies and bar code setup parameters included in this appendix are: • "Predefined Defaults" on page G-2.
Programming Bar Codes Predefined Defaults Minimum Registry * / / F F 3 9 F F 3 F * * Restore From Registry Maximum * / / F F 3 A F F 3 F * / / F F 3 C F F 3 F * / / F F 3 D * * / / F F 3 F * Save To Registry Factory * / / F F 3 B F F 3 F * * Codabar ENABLE On * Off / / 0 3 0 0 1 F F 3 E * * / / 0 3 0 0 0 F F 3 E * / / 0 3 0 1 0 F F 3 E * / / 0 3 0 2 0 F F 3 E * ENABLE AGGRESSIVE DECODING On * Off / / 0 3 0 1 1 F F 3 E * * ENABLE CHECKSUM On * Off /
Codabar CONVERT TO CLSI On * Off / / 0 3 0 6 1 F F 3 E * * / / 0 3 0 6 0 F F 3 E * / / 0 3 0 7 0 F F 3 E * / / 0 3 2 0 3 0 F F 3 E * / / 0 3 2 0 4 0 F F 3 E * / / 0 3 2 0 5 0 F F 3 E * / / 0 3 2 1 3 0 F F 3 E * / / 0 3 2 1 4 0 F F 3 E * / / 0 3 2 1 5 0 F F 3 E * ALLOW WIDE INTERCHARACTER GAPS On * Off / / 0 3 0 7 1 F F 3 E * * MINIMUM LENGTH 30 1 * / / 0 3 2 0 0 1 F F 3 E * 4 * 40 / / 0 3 2 0 0 4 F F 3 E * 10 * * * 50 / / 0 3 2 0 1 0 F F 3 E * / /
Programming Bar Codes READ VERIFICATION 1 * 3 / / 0 3 2 2 0 1 F F 3 E * 2 * G-4 * / / 0 3 2 2 0 3 F F 3 E * / / 0 3 2 2 0 4 F F 3 E * 4 / / 0 3 2 2 0 2 F F 3 E * * Pegaso™ Industrial PDA with Windows® CE
Code 39 Code 39 ENABLE On * Off / / 0 1 0 0 1 F F 3 E * * / / 0 1 0 0 0 F F 3 E * ENABLE AGGRESSIVE DECODING On * Off / / 0 1 0 1 1 F F 3 E * * / / 0 1 0 1 0 F F 3 E * ENABLE CHECKSUM On * Off / / 0 1 0 2 1 F F 3 E * * / / 0 1 0 2 0 F F 3 E * / / 0 1 0 3 0 F F 3 E * / / 0 1 0 5 0 F F 3 E * SEND CHECKSUM Off On * / / 0 1 0 3 1 F F 3 E * * FULL ASCII MODE On Off * / / 0 1 0 5 1 F F 3 E * * MINIMUM LENGTH 1 * 30 / / 0 1 2 0 0 1 F F 3 E * 10 * / / 0 1
Programming Bar Codes MAXIMUM LENGTH 1 * 30 / / 0 1 2 1 0 1 F F 3 E * 10 * / / 0 1 2 1 3 0 F F 3 E * / / 0 1 2 1 4 0 F F 3 E * / / 0 1 2 1 5 0 F F 3 E * / / 0 1 2 2 0 3 F F 3 E * / / 0 1 2 2 0 4 F F 3 E * 40 / / 0 1 2 1 1 0 F F 3 E * 20 * * * 50 / / 0 1 2 1 2 0 F F 3 E * * READ VERIFICATION 1 * 3 / / 0 1 2 2 0 1 F F 3 E * 2 * G-6 * 4 / / 0 1 2 2 0 2 F F 3 E * * Pegaso™ Industrial PDA with Windows® CE
Code 93 Code 93 ENABLE On Off * / / 0 4 0 0 1 F F 3 E * * / / 0 4 0 0 0 F F 3 E * ENABLE AGGRESSIVE DECODING On * Off / / 0 4 0 1 1 F F 3 E * * / / 0 4 0 1 0 F F 3 E * / / 0 4 2 0 3 0 F F 3 E * / / 0 4 2 0 4 0 F F 3 E * / / 0 4 2 0 5 0 F F 3 E * / / 0 4 2 1 3 0 F F 3 E * / / 0 4 2 1 4 0 F F 3 E * / / 0 4 2 1 5 0 F F 3 E * / / 0 4 2 2 0 3 F F 3 E * MINIMUM LENGTH 2 30 * / / 0 4 2 0 0 2 F F 3 E * 10 * 40 / / 0 4 2 0 1 0 F F 3 E * 20 * * * 50 / / 0 4
Programming Bar Codes 2 * G-8 4 / / 0 4 2 2 0 2 F F 3 E * * / / 0 4 2 2 0 4 F F 3 E * Pegaso™ Industrial PDA with Windows® CE
Code 128 Code 128 ENABLE On * Off / / 0 4 0 8 1 F F 3 E * * / / 0 4 0 8 0 F F 3 E * / / 0 4 0 9 0 F F 3 E * / / 0 4 0 C 0 F F 3 E * / / 0 4 0 E 0 F F 3 E * / / 0 4 2 4 3 0 F F 3 E * / / 0 4 2 4 4 0 F F 3 E * / / 0 4 2 4 5 0 F F 3 E * ENABLE AGGRESSIVE DECODING On * Off / / 0 4 0 9 1 F F 3 E * * ENABLE UCC/EAN-128 On * Off / / 0 4 0 C 1 F F 3 E * * ISBT CONCATENATION On * Off / / 0 4 0 E 1 F F 3 E * * MINIMUM LENGTH 1 * 30 / / 0 4 2 4 0 1 F F 3 E * 2 *
Programming Bar Codes MAXIMUM LENGTH 1 30 * / / 0 4 2 5 0 1 F F 3 E * 10 * / / 0 4 2 5 3 0 F F 3 E * / / 0 4 2 5 4 0 F F 3 E * / / 0 4 2 5 5 0 F F 3 E * / / 0 4 2 6 0 3 F F 3 E * / / 0 4 2 6 0 4 F F 3 E * 40 * / / 0 4 2 5 1 0 F F 3 E * 20 * 50 * / / 0 4 2 5 2 0 F F 3 E * * READ VERIFICATION 1 3 * / / 0 4 2 6 0 1 F F 3 E * 2 * 4 * / / 0 4 2 6 0 2 F F 3 E * * EAN-13 ENABLE On Off * / / 0 5 1 0 1 F F 3 E * * / / 0 5 1 0 0 F F 3 E * ENABLE AGGRESSIVE
EAN-13 SEND SYSTEM DIGIT On Off * / / * 0 5 1 3 1 F F 3 E * / / 0 5 1 3 0 F F 3 E * / / 0 5 1 4 0 F F 3 E * / / 0 5 1 5 0 F F 3 E * CONVERT EAN-13 TO ISBN On Off * / / 0 5 1 4 1 F F 3 E * * CONVERT EAN-13 TO ISSN On Off * / / 0 5 1 5 1 F F 3 E * * ENABLE EAN 4-DIGIT PRICE/WEIGHT CHECK DIGIT On Off * / / * 0 5 1 6 1 F F 3 E * / / 0 5 1 6 0 F F 3 E * ENABLE EAN 5-DIGIT PRICE/WEIGHT CHECK DIGIT On * / / 0 5 1 7 1 F F 3 E * O f f Off * / / 0 5 1 7 0 F F 3 E *
Programming Bar Codes EAN-8 ENABLE On Off * / / 0 5 1 8 1 F F 3 E * * / / 0 5 1 8 0 F F 3 E * / / 0 5 1 9 0 F F 3 E * / / 0 5 1 A 0 F F 3 E * / / 0 5 1 B 0 F F 3 E * ENABLE AGGRESSIVE DECODING On * Off / / 0 5 1 9 1 F F 3 E * * SEND CHECK DIGIT On Off * / / * 0 5 1 A 1 F F 3 E * CONVERT EAN-8 TO EAN-13 Off On * / / 0 5 1 B 1 F F 3 E * * READ VERIFICATION 1 * 3 / / 0 5 2 6 0 1 F F 3 E * 2 * G-12 * / / 0 5 2 6 0 3 F F 3 E * / / 0 5 2 6 0 4 F F 3 E * 4
Interleaved 2 of 5 Interleaved 2 of 5 ENABLE On * Off / / 0 2 1 0 1 F F 3 E * * / / 0 2 1 0 0 F F 3 E * ENABLE AGGRESSIVE DECODING On * Off / / 0 2 1 1 1 F F 3 E * * / / 0 2 1 1 0 F F 3 E * ENABLE CHECKSUM On * Off / / 0 2 1 2 1 F F 3 E * * / / 0 2 1 2 0 F F 3 E * / / 0 2 1 3 0 F F 3 E * / / 0 2 1 4 0 F F 3 E * SEND CHECKSUM On * Off / / 0 2 1 3 1 F F 3 E * * ENABLE CASE CODE On * Off / / 0 2 1 4 1 F F 3 E * * MINIMUM LENGTH 2 * 30 / / 0 2 2 8 0 2 F F
Programming Bar Codes MAXIMUM LENGTH 2 * 30 / / 0 2 2 9 0 2 F F 3 E * 10 * / / 0 2 2 9 3 0 F F 3 E * / / 0 2 2 9 4 0 F F 3 E * / / 0 2 2 9 5 0 F F 3 E * / / 0 2 2 A 0 3 F F 3 E * / / 0 2 2 A 0 4 F F 3 E * 40 / / 0 2 2 9 1 0 F F 3 E * 20 * * * 50 / / 0 2 2 9 2 0 F F 3 E * * READ VERIFICATION 1 * 3 / / 0 2 2 A 0 1 F F 3 E * 2 * G-14 * 4 / / 0 2 2 A 0 2 F F 3 E * * Pegaso™ Industrial PDA with Windows® CE
Matrix 2 of 5 Matrix 2 of 5 ENABLE On Off * / / 0 2 0 8 1 F F 3 E * * / / 0 2 0 8 0 F F 3 E * ENABLE AGGRESSIVE DECODING On * Off / / 0 2 0 9 0 F F 3 E * * / / 0 2 0 9 1 F F 3 E * ENABLE CHECKSUM On Off * / / 0 2 0 A 1 F F 3 E * * / / 0 2 0 A 0 F F 3 E * / / 0 2 0 B 0 F F 3 E * SEND CHECKSUM On Off * / / 0 2 0 B 1 F F 3 E * * MINIMUM LENGTH 1 * 30 / / 0 2 2 4 0 1 F F 3 E * 6 * / / 0 2 2 4 3 0 F F 3 E * / / 0 2 2 4 4 0 F F 3 E * / / 0 2 2 4 5 0 F F 3 E
Programming Bar Codes MAXIMUM LENGTH 1 * 30 / / 0 2 2 5 0 1 F F 3 E * 10 * / / 0 2 2 5 3 0 F F 3 E * / / 0 2 2 5 4 0 F F 3 E * / / 0 2 2 5 5 0 F F 3 E * / / 0 2 2 6 0 3 F F 3 E * / / 0 2 2 6 0 4 F F 3 E * 40 / / 0 2 2 5 1 0 F F 3 E * 20 * * * 50 / / 0 2 2 5 2 0 F F 3 E * * READ VERIFICATION 1 * 3 / / 0 2 2 6 0 1 F F 3 E * 2 * G-16 * 4 / / 0 2 2 6 0 2 F F 3 E * * Pegaso™ Industrial PDA with Windows® CE
MSI MSI ENABLE On Off * / / 0 6 0 8 1 F F 3 E * * / / 0 6 0 8 0 F F 3 E * ENABLE AGGRESSIVE DECODING On Off * / / 0 6 0 9 1 F F 3 E * * / / 0 6 0 9 0 F F 3 E * REQUIRE 2 CHECK DIGITS On Off * / / 0 6 0 A 1 F F 3 E * * / / 0 6 0 A 0 F F 3 E * / / 0 6 0 B 0 F F 3 E * / / 0 6 0 C 0 F F 3 E * SEND CHECK DIGITS On Off * / / 0 6 0 B 1 F F 3 E * * 2ND CHECK DIGIT MOD 11 On Off * / / 0 6 0 C 1 F F 3 E * * MINIMUM LENGTH 1 * 10 / / 0 6 2 4 0 1 F F 3 E * 4 *
Programming Bar Codes MAXIMUM LENGTH 1 10 * / / 0 6 2 5 0 1 F F 3 E * 4 * / / 0 6 2 5 1 0 F F 3 E * / / 0 6 2 5 1 2 F F 3 E * / / 0 6 2 5 1 5 F F 3 E * / / 0 6 2 6 0 3 F F 3 E * / / 0 6 2 6 0 4 F F 3 E * 12 * / / 0 6 2 5 0 4 F F 3 E * 7 * 15 * / / 0 6 2 5 0 7 F F 3 E * * READ VERIFICATION 1 * 3 / / 0 6 2 6 0 1 F F 3 E * 2 * G-18 * 4 / / 0 6 2 6 0 2 F F 3 E * * Pegaso™ Industrial PDA with Windows® CE
Pharmacode 39 (Code 32) Pharmacode 39 (Code 32) ENABLE On Off * / / 0 1 1 0 1 F F 3 E * * / / 0 1 1 0 0 F F 3 E * / / 0 1 1 2 0 F F 3 E * / / 0 1 1 3 0 F F 3 E * / / 0 8 0 0 0 F F 3 E * / / 0 8 0 4 0 F F 3 E * / / 0 8 0 8 0 F F 3 E * SEND CHECKSUM On Off * / / 0 1 1 2 1 F F 3 E * * SEND START/STOP On Off * / / 0 1 1 3 1 F F 3 E * * RSS-14 ENABLE On * Off / / 0 8 0 0 1 F F 3 E * * ENABLE RSS-14 to UCC-128 On * Off / / 0 8 0 4 1 F F 3 E * * RSS Limited ENA
Programming Bar Codes ENABLE RSS Limited to UCC-128 On * G-20 Off / / 0 8 0 C 1 F F 3 E * * / / 0 8 0 C 0 F F 3 E * Pegaso™ Industrial PDA with Windows® CE
RSS Expanded RSS Expanded ENABLE On Off * / / * 0 8 1 0 1 F F 3 E * / / 0 8 1 0 0 F F 3 E * / / 0 8 1 4 0 F F 3 E * ENABLE RSS Expanded to UCC-128 On Off * / / 0 8 1 4 1 F F 3 E * * MINIMUM LENGTH 1 * 45 / / 0 8 2 4 0 1 F F 3 E * 15 * / / 0 8 2 4 4 5 F F 3 E * / / 0 8 2 4 6 0 F F 3 E * / / 0 8 2 4 7 4 F F 3 E * / / 0 8 2 5 4 5 F F 3 E * / / 0 8 2 5 6 0 F F 3 E * / / 0 8 2 5 7 4 F F 3 E * 60 / / 0 8 2 4 1 5 F F 3 E * 30 * * * 74 / / 0 8 2 4 3 0 F F 3
Programming Bar Codes Standard 2 of 5 ENABLE On Off * / / 0 2 0 0 1 F F 3 E * * / / 0 2 0 0 0 F F 3 E * ENABLE AGGRESSIVE DECODING On * Off / / 0 2 0 1 1 F F 3 E * * / / 0 2 0 1 0 F F 3 E * ENABLE CHECKSUM On Off * / / * 0 2 0 2 1 F F 3 E * / / 0 2 0 2 0 F F 3 E * / / 0 2 0 3 0 F F 3 E * / / 0 2 0 4 0 F F 3 E * SEND CHECKSUM On Off * / / 0 2 0 3 1 F F 3 E * * USE 2-BAR START/STOP On Off * / / 0 2 0 4 1 F F 3 E * * MINIMUM LENGTH 1 * 30 / / 0 2 2 0 0 1
Trioptic MAXIMUM LENGTH 1 30 * / / 0 2 2 1 0 1 F F 3 E * 10 * / / 0 2 2 1 3 0 F F 3 E * / / 0 2 2 1 4 0 F F 3 E * / / 0 2 2 1 5 0 F F 3 E * / / 0 2 2 2 0 3 F F 3 E * / / 0 2 2 2 0 4 F F 3 E * 40 * / / 0 2 2 1 1 0 F F 3 E * 20 * 50 * / / 0 2 2 1 2 0 F F 3 E * * READ VERIFICATION 1 * 3 / / 0 2 2 2 0 1 F F 3 E * 2 * * 4 / / 0 2 2 2 0 2 F F 3 E * * Trioptic ENABLE On Off * / / 0 1 0 8 1 F F 3 E * * / / 0 1 0 8 0 F F 3 E * ENABLE AGGRESSIVE DECODING On
Programming Bar Codes READ VERIFICATION 1 * 3 / / 0 1 2 4 0 1 F F 3 E * 2 * G-24 * / / 0 1 2 4 0 3 F F 3 E * / / 0 1 2 4 0 4 F F 3 E * 4 / / 0 1 2 4 0 2 F F 3 E * * Pegaso™ Industrial PDA with Windows® CE
UPC-A UPC-A ENABLE On Off * / / 0 5 0 0 1 F F 3 E * * / / 0 5 0 0 0 F F 3 E * / / 0 5 0 1 0 F F 3 E * ENABLE AGGRESSIVE DECODING On * Off / / 0 5 0 1 1 F F 3 E * * SEND CHECK DIGIT On Off * / / 0 5 0 2 1 F F 3 E * * / / 0 5 0 2 0 F F 3 E * / / 0 5 0 3 0 F F 3 E * / / 0 5 0 4 0 F F 3 E * SEND SYSTEM DIGIT On Off * / / 0 5 0 3 1 F F 3 E * * CONVERT UPC-A TO EAN-13 Off On * / / 0 5 0 4 1 F F 3 E * * READ VERIFICATION 1 * 3 / / 0 5 2 0 0 1 F F 3 E * 2 *
Programming Bar Codes UPC-E ENABLE SYSTEM DIGIT 0 On Off * / / 0 5 0 8 1 F F 3 E * * / / 0 5 0 8 0 F F 3 E * ENABLE AGGRESSIVE DECODING On * Off / / 0 5 0 9 1 F F 3 E * * / / 0 5 0 9 0 F F 3 E * SEND CHECK DIGIT On * Off / / 0 5 0 A 1 F F 3 E * * / / 0 5 0 A 0 F F 3 E * / / 0 5 0 B 0 F F 3 E * / / 0 5 0 C 0 F F 3 E * SEND SYSTEM DIGIT On * Off / / 0 5 0 B 1 F F 3 E * * CONVERT UPC-E TO UPC-A On * Off / / 0 5 0 C 1 F F 3 E * * READ VERIFICATION 1 * 3 / /
UPC/EAN Extensions UPC/EAN Extensions ENABLE 2-DIGIT EXTENSIONS On Off * / / 0 5 1 C 1 F F 3 E * * / / 0 5 1 C 0 F F 3 E * ENABLE 5-DIGIT EXTENSIONS Off On * / / 0 5 1 D 1 F F 3 E * * / / 0 5 1 D 0 F F 3 E * REQUIRE EXTENSIONS On Off * / / 0 5 1 F 1 F F 3 E * * / / 0 5 1 F 0 F F 3 E * READ VERIFICATION 1 * 3 / / 0 5 2 8 0 1 F F 3 E * * 2 * / / 0 5 2 8 0 3 F F 3 E * / / 0 5 2 8 0 4 F F 3 E * 4 / / 0 5 2 8 0 2 F F 3 E * * Other Controls BEEPERVOLUME Off * /
Programming Bar Codes Highest Higher (Increases the current value one increment higher) Lower (Decreases the current value one increment lower) * / / F F 2 0 0 7 F F 3 E * * / / F F 2 0 0 8 F F 3 E * * / / F F 2 0 0 9 F F 3 E * NUMBER OF GOOD-READ BEEPS 1 * / / 0 0 2 0 0 1 F F 3 E * * / / 0 0 2 0 0 2 F F 3 E * * / / 0 0 2 0 0 3 F F 3 E * * / / 0 0 2 0 0 4 F F 3 E * 2 3 4 GOOD-READ BEEP TONE Lowest * / / 0 0 2 1 0 0 F F 3 E * * / / 0 0 2 1 0 3 F F 3 E * * / / 0
Other Controls GOOD-READ BEEP DURATION (IN SECONDS) 0.07 * / / 0 0 2 2 0 0 F F 3 E * * / / 0 2 2 0 0 1 F F 3 E * * / / 0 0 2 2 0 2 F F 3 E * * / / 0 0 2 2 0 3 F F 3 E * 0.13 0.18 0.36 Long Range Trigger Mode Spot Timeout * / / 0 0 0 0 0 F F 3 E * * / / 0 0 0 0 1 F F 3 E * * / / 0 0 0 1 1 F F 3 E * * / / 0 0 0 1 0 F F 3 E * Release Scan Spotting Beam Enable On Off Spotting Beam Timeout 0.25 * / / 0 0 2 3 0 0 F F 3 E * * / / 0 2 2 0 0 1 F F 3 E * 0.
Programming Bar Codes 1.0 * / / 0 0 2 3 0 2 F F 3 E * * / / 0 0 2 3 0 3 F F 3 E * * / / 0 0 2 3 0 4 F F 3 E * 1.5 2.
Other Controls SEND SYMBOLOGY IDENTIFIERS Off * / / 0 0 2 5 0 0 F F 3 E * * / / 0 0 2 5 0 1 F F 3 E * * / / 0 0 2 5 0 2 F F 3 E * * / / 0 0 2 5 0 3 F F 3 E * * / / 0 0 2 6 $ M F F 3 E * * / / 0 0 2 6 $ * / / 0 0 2 6 % U F F 3 E * * / / 0 0 2 7 $ M F F 3 E * * / / 0 0 2 7 $ * / / 0 0 2 7 % U F F 3 E * DLM IDs AIM IDs User IDs LABEL PREFIX (CR) (TAB) I F F 3 E * None LABEL SUFFIX (CR) (TAB) I F F 3 E * None Product Reference Guide G-31
Programming Bar Codes NOTES G-32 Pegaso™ Industrial PDA with Windows® CE
Appendix H Glossary Many definitions for this Glossary were taken directly from the Microsoft Developer’s Network website at http://msdn.microsoft.com/library/default.asp. 1D bar code A traditional linear bar code. The code itself contains no information about the item to which it is assigned but represents a string of identifying numbers or letters. 2D bar code Two-dimensional (2D) bar codes permit the encoding of information about an item in addition to an identifying code.
Glossary calibration You may need to calibrate the touch screen. One way to know that the touch screen needs to be calibrated is that you will notice that when you attempt to select one item with the stylus, another item is erroneously selected. checksum A number used to verify the contents of a data file. This number is generated by calculating the contents of the data. If the calculated checksum is different from the expected checksum, the data has errors in it. CLSI CLSI, Inc.
FlashFX Persistent Flash Memory management system made by Datalight™. Data in the flash memory is retained when a battery pack is fully discharged. The backup battery must be charged to retain flash memory. Falcon Desktop Utility (FDU) Falcon® Desktop Utility (FDU) allows Datalogic Mobile Windows® administrators to configure Windows®CE Pegasos to control individual user access.
Glossary navigation key A large navigation button (4-way rocker key) on the keypad with 4 arrows: pointing up, down, left, and right that allows the user to move the cursor or highlighted text entry during menu selection. Press and release one edge of the key to move the display screen one line or one character in the direction of the arrow. Network ID Here used to mean that you should configure the Windows user settings, such as the user name, password, and domain name.
remote access server (RAS) A feature that connects a device to a host computer. Windows CE can connect to a remote access server using direct serial, infrared, and dial-up connections. Windows CE supports the standard Microsoft Win32 RAS functions; however, it allows only one connection at a time. RAS functions can be implemented for direct serial connections or dial-up modem connections. RTC Real Time Clock on the PC. shortcut menu A menu that is displayed for a selected object.
Glossary H-6 task bar The Task bar at the bottom of the screen displays the "start" icon, an icon for the active program, an icon for the current character, the current time, and system icons for utilities loaded in memory, including the keyboard icon, which opens and closes the "soft input panel (SIP)". touchscreen display A graphical computer interface display screen that allows the user to enter and select items with a "stylus". Tracert Trace Route.
INDEX SYMBOLS ... (browse) B-9, B-12 .
Index decoding 2-9 EAN-13 G-10 EAN-8 G-12 interleaved 2 of 5 G-13 label suffix G-31 matrix 2 of 5 G-15 MSI G-17 parameters F-3 Pharmacode 39 (Code 32) G-19 predefined defaults G-2 programming G-1 RSS G-19, G-21 standard 2 of 5 G-22 symbologies 2-8, 2-9, 2-10 trioptic G-23 UPC/EAN extensions G-27 UPC-A G-25 UPC-E G-26 without parameters F-2 battery CAUTIONS 1-3 disposal 1-3 failure 1-3 window 1-3 lithium-ion 1-3 tab 2-20 WARNINGS 1-2 Battery Pack A-2 beep duration, good-read F-14, G-29 good-read number F-14,
Index D Datalogic.
Index zip 3-5, 3-6 file icons B-12 firmware H-2 aborting update 3-11 restoration 3-8 retrieving image 3-8 updates link 3-8 updating 3-10 Firmware Update Utility 3-8, H-3 FlashFX H-3 FMU 2-13 formatting conventions i-vi Four-Slot Battery Charger A-5 Four-Slot Charge Dock A-4 Four-Slot Ethernet Dock A-4 Full ASCII conversion 2-10 FUU 3-8, H-3 restoring firmware 3-8 G general options 2-8 decoding control panel 2-8, 2-9, 2-10 generic error B-8 glossary H-1 good-read beep duration F-14, G-29 beep tone F-14, G-2
Index MIB H-3 Datalogic D-1 files D-1 min/max lengths 2-10 minimum default settings G-2 mobile device 4-4 explore 4-5 mode resume 1-1 suspend 1-1 Modem A-6 Modem Module A-6 mounted file system H-3 mouse click i-vii double-click i-vii right click i-vii select i-vii using i-vii MSI F-8, G-17 my documents 4-7 N name servers 2-17 navigation key H-4 Network ID H-4 network ActiveSync setup 4-9 connections 2-17, 4-8 ID 4-8 overview 4-1 setup ID 4-8 networking 4-8 new B-11 button B-11 hotkey B-6 non-persistent sta
Index product registration i-vi program memory H-4 program, adding B-11 programming bar codes G-1 parameters F-1 programs adding to the start menu installing 3-5 removing 3-7 3-7 R RAM 2-24, H-4 ReadMe files 3-6 rebar H-4 reboot after restoring firmware 3-12 application list H-1 regional settings 2-21 registry defaults G-2 reinstall applications from cold boot release scan timeout F-14 remote access server (RAS) H-5 remote ActiveSync 4-9 removing applications 3-7 Request Cancelled B-8 restore firmware 3-1
Index IDs 2-8 interleaved 2 of 5 F-7, F-8, G-13 matrix 2 of 5 G-15 MSI F-8, G-17 Pharmacode 39 (Code 32) F-9, G-19 RSS G-19, G-21 send identifiers F-14, G-31 standard 2 of 5 F-11, G-22 trioptic F-11, G-23 UPC/EAN extensions F-13, G-27 UPC-A F-12, G-25 UPC-E F-12, G-26 synchronization folder 4-7 synchronizing files 4-6 system firmware version 2-24 properties 2-24 serial number 2-24 system tray H-5 icons H-5 keyboard Indicators H-5 keyboard indicators H-5 T V version ActiveSync 4-1 volume adjusting 2-25 bee
Index NOTES I-8 Pegaso™ Industrial PDA with Windows® CE
Corporate Headquarters Datalogic S.p.A. Via Candini, 2 40012 Lippo di Calderara di Reno Bologna - Italy Telephone: +39 051 3147011 Fax: +39 051 726562 www.mobile.datalogic.com Datalogic Mobile, Inc. 1505 Westec Dr. Eugene, OR 97402 Telephone: (541) 743-4800 Fax: (541) 743-4900 ©2007 Datalogic Mobile, Inc.
