User manual

WIN-NET VEHICLE PWR CAB (HRS 3500-16P-CV)
The
WIN-NET VEHICLE PWR CAB (HRS 3500-16P-CV) is an accessory regulated
power supply cable used to charge the battery of your Datalogic Mobile Computer
from your vehicle.
REPLACING THE FUSE
To replace the fuse:
1. Disconnect the cable from the terminal.
2. Open the cigarette lighter connector by removing the screw and pulling off the sleeve.
3. Replace the fuse with a new one of the same type.
4. Close the connector, replace the sleeve and tighten the screw.
TECHNICAL FEATURES
Electrical Features
Power supply 10 to 32 Vdc
Consumption (when charging) 1.8 A max.
Quiescent Consumption
(not charging)
5 mA max.
Environmental Features
Working temperature* 0° to + 50 °C / +32° to +122 °F
Storage temperature -20° to +70 °C / -4° to +158 °F
Humidity 90% non condensing
Protection IP40
Mechanical Features
Cable Length 2 m / 6 ft. 6 in.
Weight about 160 g. / 5.6 oz
* Battery must be charged at a temperature ranging from 0° to +45 °C (+32° to +113 °F).
WEEE COMPLIANCE
822000660 (Rev. B)
8A Slow-blow
Fuse
Sleeve
to Datalogic
Mobile Computer
to Vehicle
Cigarette Lighter