0 Manual

General Features

28 QuickScan

Global Prefix/Suffix

ASCII characters may be added as a prefix (in a position before the bar code data) and/

or as a suffix (in a position following the bar code data). Scan the bar code below labeled

“Scan Options”, then one of the following four bar codes corresponding to the posi-

tion(s) you wish to specify:

• Data As Is

• <DATA> <SUFFIX>

• <PREFIX> <DATA>

• <PREFIX> <DATA> <SUFFIX>.

Scan the “Enter” bar code to complete the change. To set values for the prefix and/or

suffix, See Prefix/Suffix Values on page 27. Scan the bar code “Data Format Can-

cel” if you wish to cancel the change.

If a carriage return/enter is required after each scanned bar code, scan the following bar

codes in order:

1. “Scan Options”

2. <DATA> <SUFFIX>

3. “Enter”

Scan Options

*Data As Is