User's Manual

GRYPHON™ BT SH3500
62
8
GRYPHON™ BT SH3500 READER DATA ENTRY
Beeper ¹
LED Good Read Spot Meaning
one beep²
ON ON Correct read of a code in normal mode
H L long
TX error between Gryphon™ BT SH3500 and
remote Bluetooth
®
device
H long ON ON Successful advanced format concatenation
H H H Timeout expired – operation not completed
H H long Error in advanced data formatting
OFF OFF Ready to read a code
GRYPHON™ BT SH3500 READER STATUS
Beeper ¹
LED Meaning
L M M H Radio connection
H M M L Radio disconnection
1 blink / 2 sec. Radio connected
2 blinks / 2 sec. Radio not connected
1 blink / 4 sec. Sleep state and radio connected
2 blinks / 4 sec. Sleep state and radio not connected
ticks Short blinks (Master only) Connection / re-connection attempts
¹ Only the Beeper Intensity command can modify these signals.
² The data entry good read tone is user-configurable with all
the Beeper commands in the
Reading Parameters section.
Normally this results in two beeps; the first indicates that the reader has decoded the code,
the second indicates whether the remote Bluetooth
®
device has received the data.