User's Manual

CONFIGURATION
11
4
4.2 SETUP PROCEDURE
Follow the given procedure to set up Gryphon™ BT SH3500.
Read the restore default parameters code below.
Restore Gryphon™ BT SH3500 Default
1.
iPk
iPk
iPk
Read the Bind code to pair the Gryphon™ BT SH3500 to the OM-Gryphon™
BT SH3500 cradle.
The reader is dedicated to the cradle. Any previously bound reader will be
excluded.
Bind
2.
i3/*k
i3/*k
i3/*k
The green LED on the Gryphon™ BT SH3500 will blink; the reader is ready to
be positioned onto the cradle.
Firmly position the reader onto the OM-Gryphon™ BT SH3500 cradle within
10 seconds, a beep will be emitted, signaling that the OM-Gryphon™ BT
SH3500 cradle has been paired to the Gryphon™ BT SH3500, and the green
LED on the reader will go off.
3.
YOUR READER IS NOW CONFIGURED TO READ BARCODES USING
THE DEFAULT VALUES.
4.
Configure the OM-Gryphon™ BT SH3500 cradle. Refer to par. 4.3, par. 4.4 or
par. 4.5 depending on the interface selection code required for your
application
Green LED