User's Manual

CONFIGURATION

4.5 USB INTERFACE CONFIGURATION AND SELECTION

The USB interface is compatible with:

Windows 98 (and later) IBM POS for Windows

Mac OS 8.0 (and later) 4690 Operating System

USB START-UP

As with all USB devices, upon connection, the Host performs several checks by

communicating with the OM-Gryphon™ BT SH3500. Before the OM-Gryphon™ BT

SH3500 is ready, the correct USB driver must be loaded

For all systems, the correct USB driver for the default USB-KBD interface is included

in the Host Operating System and will either be loaded automatically or will be

suggested by the O.S. and should therefore be selected from the dialog box (the first

time only).

You can now read codes with the associated Gryphon™ BT SH3500 reader. At this

point you can read the USB interface configuration code according to your

application. Load drivers from the O.S. (if requested). When configuring the USB-

COM interface, the relevant files and drivers must be installed from the USB Device

Installation software which can be downloaded from the web site:

http://www.datalogic.com

The OM-Gryphon™ BT SH3500 is ready.

Connect OM-

Gryphon™ BT to

Host

Select desired USB interface

code (USB-KBD is default)

Read test codes.

OM-Gryphon™ BT is READY

Load drivers

(if requested)

Load drivers

(

if re

uested

)

First Start-Up

Successive start-ups will automatically recognize the previously loaded drivers.