User's Guide

DRAGON™ M SERIES

DRAGON™ M DEFAULT CONFIGURATION

DATA FORMAT

code identifier disabled, field adjustment disabled, code length not

transmitted, character replacement disabled, time stamping disabled, time

stamping delimiter disabled

READING PARAMETERS

hardware trigger, trigger active level, no trigger timeout, one read per cycle,

safety time 0.5 sec, beeper intensity high, tone 2, aiming spot = disabled

DISPLAY/KEYPAD PARAMETERS

Font size = small, display timeout = 8 sec., backlight = off, display mode =

local echo, keypad enabled, KeyID characters: left = '<', center = '=', right = '>'

DECODING PARAMETERS

ink spread enabled, overflow control enabled, interdigit control enabled,

decoding safety = one read, Puzzle Solver™ disabled

CODE SELECTION

enabled codes

• EAN 8/EAN 13 / UPC A/UPC E without ADD ON

check digit transmitted, no conversions

• Interleaved 2/5

check digit control and transmission, variable length code; 4-99

characters

• Standard Code 39

no check digit control, variable length code; 1-99 characters

• Code 128

variable length code; 1-99 characters

disabled codes

EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, RSS codes,

MSI, Plessey, Telepen, Delta IBM, Code 11, Code 16K, Code 49

ADVANCED FORMATTING PARAMETERS

concatenation disabled, no advanced formats defined

RADIO PARAMETERS

radio protocol timeout = 2 seconds, power-off timeout = 4 hours, transmission

mode = one-way, beeper control for radio response = normal, single store

disabled, batch mode disabled