User's Guide

DATALOGIC
2
SYSTEM CONNECTIONS
CAUTION
Connections should always be made with power off!
You can connect the OM-GRYPHON™ cradle to the Host through the
dedicated connector, using the cable corresponding to the desired interface
type.
CONNECTING AND DISCONNECTING THE
OM-GRYPHON™ INTERFACE CABLE
To connect the OM-GRYPHON™ :
1. Connnect the OM-GRYPHON™ to the appropriate interface cable which
must be simply plugged into the Host connector on the base of the cradle.
2. Connect the cradle to an external power supply, see the figure below.
OM-GRYPHON™ - Bottom View
To disconnect the cable, insert a paper clip or other similar object into the hole
corresponding to the Host connector on the body of the cradle. Push down on the
clip while unplugging the cable. Refer to the following figure:
OM-GRYPHON™ - Disconnecting the Cable
Power Supply
Host Interface
Cable