User's Manual

USE AND FUNCTIONING
45
3
3.7.5 Ethernet Settings
Kyman™ can be connected to an Ethernet network by inserting it into the Datalogic
Kyman™ Ethernet Multi Cradle.
When correctly inserted into the Ethernet Multi Cradle, the Ethernet driver installed
on the mobile computer will automatically run, and using the DHCP service, will
dynamically assign the IP Address.
The LAN icon will appear on the Taskbar indicating the LAN connection status.
By double tapping on the LAN icon in the
Taskbar, the LANNDS1 applet allows
visualizing the TCP/IP information. Other
information such as the MAC Address is
available by tapping the Details... button.
If it is necessary to set static TCP/IP
parameters, you must open the
LANNDS1 applet from the Network and
Dial-up Connections applet in the
Control Panel. This applet is only visible
when the mobile computer is correctl
y
inserted into the Ethernet Multi Cradle.
Ethernet LANNDS1 Communications Window
The IP Address belongs to Kyman™ while the MAC address is specific to each
cradle slot.
Once you have established a valid ethernet connection you can use it in
several ways:
- To configure the Internet Explorer for use with the ethernet line
open
Internet Explorer->view->Internet Options->Connection tab, check the “use
LAN no autodial” then click on the OK button. If your network provides
Internet Service and does not use a proxy server you can directly access
LAN icon