User's Manual
Table Of Contents
- CONTENTS
- UPDATES AND LANGUAGE AVAILABILITY
- USING QUICKSCAN™ M GUN AND CRADLE
- SYSTEM CONNECTIONS
- QUICKSCAN™ M CRADLE CONFIGURATION
- QUICKSCAN™ M READER CONFIGURATION
- INTERFACE SELECTION
- USB INTERFACE CONFIGURATION
- USB INTERFACE SELECTION
- RS232 INTERFACE SELECTION
- WEDGE INTERFACE SELECTION
- USB / WEDGE KEYBOARD NATIONALITY
- PEN INTERFACE SELECTION
- OPERATING TEST
- READER DEFAULT CONFIGURATION
- CRADLE DEFAULT CONFIGURATION
- TECHNICAL FEATURES
- WARRANTY
- PATENTS
- SERVICES AND SUPPORT
- COMPLIANCE
- READING DIAGRAM
- NUMERIC TABLE
- DECLARATION OF CONFORMITY
DATALOGIC
5.
Read the Bind code to pair the QuickScan™ M gun to the cradle.
The reader is dedicated to the cradle. Any previously bound reader will
be excluded.
Bind
Ì$+RN0$-IÎ
The green LED on the QuickScan™ M reader will blink: the reader is
ready to be positioned onto the cradle.
6.
Firmly position the reader onto the cradle within 10 seconds, a beep will
be emitted, signaling that the QuickScan™ M cradle has been paired to
the QuickScan™ M gun.
YOUR READER IS NOW READY TO READ CODES.
7.
Now you can configure the QuickScan™ M cradle by reading
configuration barcodes.
INTERFACE SELECTION
Follow the procedure to configure the interface required by your application.
Multi-standard interface models:
• USB Interface
• RS232 Interface
• Wedge Interface
• Pen Interface
8