User's Manual
Table Of Contents
- CONTENTS
- UPDATES AND LANGUAGE AVAILABILITY
- USING QUICKSCAN™ M GUN AND CRADLE
- SYSTEM CONNECTIONS
- QUICKSCAN™ M CRADLE CONFIGURATION
- QUICKSCAN™ M READER CONFIGURATION
- INTERFACE SELECTION
- USB INTERFACE CONFIGURATION
- USB INTERFACE SELECTION
- RS232 INTERFACE SELECTION
- WEDGE INTERFACE SELECTION
- USB / WEDGE KEYBOARD NATIONALITY
- PEN INTERFACE SELECTION
- OPERATING TEST
- READER DEFAULT CONFIGURATION
- CRADLE DEFAULT CONFIGURATION
- TECHNICAL FEATURES
- WARRANTY
- PATENTS
- SERVICES AND SUPPORT
- COMPLIANCE
- READING DIAGRAM
- NUMERIC TABLE
- DECLARATION OF CONFORMITY
QUICKSCAN™ MOBILE
USING QUICKSCAN™ M GUN AND CRADLE
The QuickScan™ M gun and cradle build a Cordless Reading System for the
collection, decoding and transmission of barcoded data.
Standard models can be connected to a Host PC through a USB, RS232,
Wedge or Pen emulation cable. All models are suited for single-cradle layouts.
The LEDs signal the QuickScan™ M cradle status, as described in the following
table:
LED BEEPER STATUS
Power on /
Data
- Yellow On = QuickScan™ M cradle is
powered.
Yellow Blinking = the cradle receives data
and commands from the Host or the reader.
Charging
-
Red On = the battery charge is in progress.
Charge
completed
- Green On = the battery is completely
charged.
Alternating
red/green
Repetitive
beep
Charging out of temperature range, over-
current or over-voltage conditions
Power on / Data
(yellow LED)
Charge completed
(green LED)
Charging
(red LED)
1