User's Manual
Table Of Contents
- CONTENTS
- UPDATES AND LANGUAGE AVAILABILITY
- USING QUICKSCAN™ M GUN AND CRADLE
- SYSTEM CONNECTIONS
- QUICKSCAN™ M CRADLE CONFIGURATION
- QUICKSCAN™ M READER CONFIGURATION
- INTERFACE SELECTION
- USB INTERFACE CONFIGURATION
- USB INTERFACE SELECTION
- RS232 INTERFACE SELECTION
- WEDGE INTERFACE SELECTION
- USB / WEDGE KEYBOARD NATIONALITY
- PEN INTERFACE SELECTION
- OPERATING TEST
- READER DEFAULT CONFIGURATION
- CRADLE DEFAULT CONFIGURATION
- TECHNICAL FEATURES
- WARRANTY
- PATENTS
- SERVICES AND SUPPORT
- COMPLIANCE
- READING DIAGRAM
- NUMERIC TABLE
- DECLARATION OF CONFORMITY
DATALOGIC
WEDGE DEFAULT SETTINGS
USA keyboard, caps lock off, caps lock auto-recognition enabled; num lock
unchanged, inter-character and inter-code delay disabled.
DATA FORMAT: code identifier disabled, code length not transmitted, no
header, terminator = ENTER, character replacement disabled, address
stamping disabled, address delimiter disabled.
PEN DEFAULT SETTINGS
Interpret operating mode, minimum output pulse 600 µs, conversion to Code 39,
overflow medium, output level normal, idle level normal, inter-block delay
disabled.
TECHNICAL FEATURES
QuickScan™ M Reader and Cradle
Electrical Features - GUN
Battery Type 1 Lithium battery 700 mAh
Time of recharge Lithium max 6 hours with USB cable
Operating autonomy typical 20000 reads
Indicators LED, Beeper
Max scan rate 235 scans/sec
Electrical Features - CRADLE
Supply voltage
5 Vdc ± 5%
Power consumption max. 4 W (charging)
LED Indicators Battery charging red
Charge completed green
Power / Data yellow
Optical Features
Sensor CCD solid state (2088 pixels)
Illuminator LED array
Wavelength 630 ~ 670 nm
Max. LED Output Power 0.33 mW
LED safety class Class 1 EN 60825-1
Reading field see reading diagram
Max. resolution 0.10 mm, 4 mils
PCS minimum 20% (Datalogic Test Chart)
20