Integration Guide
Rfid Engine R3 Test
R3Integration Guide.doc page 3 of 5
DATALOGIC PROPRIETARY INFORMATIONS
Introduction
The RF-3 RFID Engine is a dual technology module combining an undecoded laser scan engine
with a multi-standard high frequency RFID engine (requiring an ANSI C library for decoding).
Thus, it provides a single product allowing reading standard barcode symbologies and 13.56 MHz
tags and smart labels.
The Module is physically and electrically compatible with the Motorola SE1200 laser module thus
guaranteeing an easy integration within many Hand-Held barcode readers (Host). In addition,
it integrates an internal small antenna.
The RFID supports the following standards:
• ISO14443A
• ISO14443B
• ISO15693
• Philips I-Code 1
There are 4 versions available:
•
Rfid only
•
Rfid only + SE950 barcode reader
•
Rfid only – With plastic frame for mounting on Datalogic DLBJET
•
Rfid only + SE950 barcode reader – With plastic frame for mounting on Datalogic DLBJET
Block Diagram
•
Flat cab.: 10 poles flex cable.
•
Antenna: Integral 4 turns loop antenna
• Scan engine: Optional SE950 Module from Motorola.
HOST
Level
shifters
ARM7
uP
RF
modem
RF front
end
Antenna
3,3V
LDO
5,2V
Step Up
Flat cab.
Scan
engine
Level
shifters