Integration Guide

Rfid Engine R3 Test
R3Integration Guide.doc page 5 of 5
DATALOGIC PROPRIETARY INFORMATIONS
Regulatory
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device my not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Caution
Modifications or changes to this equipment without the expressed written approval of Datalogic Scanning
Group S.r.l. would void the authority to use the equipment.
Labeling requirements for the End Product
Any device incorporating this module must be labeled with the following informations:
Contains FCC ID: U4F0018
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device my not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Technical Features
Electical Features
Power Supply From 3,13 Vdc to 5,25 Vdc
Max. Input Current 600mA
Max. Stand-by current 500uA
Radio Features
RF Frequency 13.56 Mhz
Max. SPI Clock Frequency 100 Kbit/s
RFID reading distance Up to 10 cm depending on tag.
Environmental Features
Operating Temperature -20 a +60’C
Storage Temperature -40 a +70 ’C
Shock resistance 2000 g
Physical Features
Mechanical dimensions 39.5 x 20 x 28 mm
Weight 19g (with SE950)