User Manual Part 2

DATALOGIC SKORPIO™

3. Launch the .reg file from the Datalogic Skorpio™.

4. Perform a software reset on the Datalogic Skorpio™.

5. From the PC > Explorer address bar (or running an FTP Client from the PC),

enter the Datalogic Skorpio™ IP address.

NOTE

For more information on FTP Client/Server connections refer to the

following web page:

http://msdn2.microsoft.com/en-us/library/aa922316.aspx.

NOTE

Datalogic Skorpio™ xxx-xxx-433 and xxx-xxx-436 models do not

contain the FTP Server. If necessary you can install it from the CD-

ROM in the Utilities folder.

3.9 BACKUP DIRECTORY FILE MANAGEMENT

All of the Windows CE system files reside in RAM (volatile memory) except for the

Backup directory, which resides in FLASH (non-volatile memory). Therefore the

contents of the Backup directory are persistent even if the mobile computer is re-

booted or the battery pack is changed.

You can save your more important files that you don't want to lose due to mobile

computer re-boot, in the Backup directory or create a sub-directory within Backup.

Even though the Windows Directory resides in RAM, it often contains files or sub-

directories created by the user or by installation programs that you don't want to lose

at re-boot. To keep these files persistent it is necessary to copy them to the directory

\Backup\Windows. This directory doesn't exist originally (only Backup exists), and

therefore it must be created. At the next hardware reset, before activating the shell,

Windows CE will copy the contents including all sub-directories of \Backup\Windows

to \Windows.

Likewise, to maintain files that must be run at Windows CE startup, (i.e. .exe, .lnk,

.vb, .htm, etc.), it is necessary to copy them to the directory \Backup\Startup. This

directory does not exist originally (only Backup exists), and therefore it must be

created. The application programs will be run after any type of re-boot (both software

and hardware reset).