User Manual

INTRODUCTION

1.4 INSERTING AN SD CARD

Datalogic Memor™ provides the possibility to add an SD memory storage card.

To access the SD card slot and to insert the card, proceed as follows:

1. Extract the SD card slot cover from side of the mobile computer. Then

carefully pull it out till unlocking its base as shown in the picture

below:

2. Insert the card with the written part upward and push it in, aided by

the back of the stylus, until it clicks into place.

To remove the SD card, just push it toward the inside, aided by the back of the

stylus, until it clicks; a spring system will return it out.