User Manual

DATALOGIC MEMOR™

4. Install the new battery pack, first insert the bottom (contacts) side, then the

upper (lock) side as indicated in the following figure:

5. For correct locking, push the battery clips outwards and rotate the screw to

the horizontal position.

WARNING

Do not incinerate, disassemble, short terminals or

expose to high temperature. Risk of fire, explosion. Use

specified charger only. Risk of explosion if the battery

is replaced by an incorrect type. Dispose of the

batteries as required by the relevant laws in force.

NOTE

In order to guarantee an adequate operating autonomy,

when replacing the battery pack the mobile computer

checks the battery energy level. If the battery is not

sufficiently charged, Datalogic Memor™ does not turn on

(when pressing the ON/OFF key).

In this case, either substitute the battery pack with a

charged one (sufficiently charged) or insert Datalogic

Memor™ into a powered cradle or plug it into the direct

power supply.

4.4 CLEANING THE MOBILE COMPUTER

Periodically clean the Datalogic Memor™ with a slightly dampened cloth.

Do not use alcohol, corrosive products or solvents.