User Manual

DATALOGIC MEMOR™

3.1.2 Using the Joystick

The joystick selects items and enters information. The joystick can work like the

directional arrow keys of a PC keyboard or can function like a mouse and

control the mouse pointer. It is possible to switch between the two functioning

modes by pressing blue modifier + BKSP keys in sequence.

Arrow Keys Mode

(default):

Move in the four directions: move forwards, backwards,

upwards or downwards within text fields, scroll through a

Menu list or browse among folder files.

Press down: selects the current function (like the

Enter key).

Mouse Mode:

Move in the four directions: move the mouse pointer

forwards, backwards, upwards or downwards.

Press down: like the left click of the mouse.

3.2 DATA CAPTURE

To configure and enable data capture parameters refer to par. 3.5.

3.2.1 Laser Data Capture

To scan barcodes, point the Datalogic Memor™ laser model onto the code from

a distance within the reading range while pressing the SCAN key.

The lighted band emitted by the laser must completely intercept the barcode as

shown in the figure below. If enabled, the emission of an acoustic signal will

indicate that the scan has taken place correctly.