User Manual

USE AND FUNCTIONING

3.7 WINDOWS CONNECTIONS

To connect the Datalogic Memor™ to another device (i.e. Host PC) from

Windows, several programs are available in the "Connections" folder on the

Datalogic Memor™ Desktop. These programs require specific electrical

connections in order to function properly. From the Desktop, double tap on the

"Connections" folder to open the following window:

Windows Connections

3.7.1 Microsoft® ActiveSync®

Microsoft

ActiveSync

gives you the possibility to connect your desktop

computer to your Datalogic Memor™ and synchronize the information on them.

Synchronization compares the data on the Datalogic Memor™ with that on the

desktop computer and updates both computers with the most recent

information.

With ActiveSync

, it is possible to:

- Back up and restore Datalogic Memor™ data.

- Copy files between Datalogic Memor™ and desktop computer.

- Synchronize files by selecting a synchronization mode.

You can establish an ActiveSync

connection to your Datalogic Memor™

through the following electrical interfaces:

RS232 either directly or through the Datalogic Memor™ Single Cradle

USB either directly or through the Datalogic Memor™ Single Cradle

Bluetooth (see par. 3.7.2)

It is possible to constantly synchronize while connected to a desktop computer

or, alternatively, synchronization can be performed only when the synchronize

command is chosen. You can select which information types are synchronized

and control how much data is synchronized.