User Manual

USE AND FUNCTIONING
31
3
3. Tap on the “Me” button to enter the related window; then, tap on the “ON”
button to activate the Bluetooth
®
module. The module activation may be
also performed by using the WIRELESS COMMUNICATION applet as
described in par. 3.6.4.
By tapping on the “HW Details” and “SW Details” buttons, information
about the mobile computer Bluetooth
®
hardware and software will be
displayed, while the “Enable Encryption” button starts encryption of the
Bluetooth
®
communication data. If tapping on the “Close” button the
Bluetooth
®
Manager Device window will be closed.
4. Tap on the “Discovery” button to enter the related window; then, tap on the
“Scan” button to run the Discovery procedure:
Once the Discovery procedure has been completed, select the desired
Bluetooth
®
device from the list. It is also possible to digit (12 hexadecimal
digits) the Bluetooth
®
address of the desired device by tapping on the “Add”
button. The “Clear” button deletes all discovered devices from the list.
5. Once the desired Bluetooth
®
device has been selected, tap on the
“Connection Wizard” button to enter the related window where selecting
the connection type to be used for communication with the Bluetooth
®
device: