User Manual

DATALOGIC MEMOR™
32
3
The “Serial Port” button starts communication through the Bluetooth
®
serial
port COM 5 (typically used for connection with GPS devices).
The “Printer” button starts communication with a printer through the
Bluetooth
®
serial port COM 5.
The “Kbd Emulation” button allows connection with a barcode reader using
the keyboard emulation.
The “ActiveSync” button starts communication with a PC equipped with a
Bluetooth
®
antenna and the related ActiveSync.
6. Hide the Bluetooth
®
Manager Device window by tapping on the icon
available on each window or close it through the “Close” button available in
the “Me” window (see step 3 of this procedure).
3.7.3 FTP Server Setup
The Datalogic Memor™ Operating System includes a sample File Transfer
Protocol (FTP) server. FTP is used for copying files to and from remote
computer systems over a network using TCP/IP. You can establish a
connection to your Datalogic Memor™ using its FTP Server through the
following interfaces:
WLAN using the WiFi radio
LAN through the Datalogic Memor™ Ethernet Multi Cradle (see par. Errore.
L'origine riferimento non è stata trovata.)
Proceed as follows:
1. Create a registry file (extension .reg) to setup and enable FTP Server
communication. A simple example file for anonymous logon is given below:
REGEDIT4
[HKEY_LOCAL_MACHINE\Comm\FTPD]
"DefaultDir"="\\"
"AllowAnonymousUpload"=dword:00000001
"UseAuthentication"=dword:00000000
"BaseDir"="\\"
"IsEnabled"=dword:00000001
"LogSize"=dword:00001000
"DebugOutputMask"=dword:00000017