User's Manual

JOYA CRADLE DISPENSER

5.4.4 Firmware update procedure

Select “Update” from main menu and insert the terminal into the rightmost slot

of the cradle.

The cradle locks the terminal and APC transfers firmware, during this period

slot leds flashes. At the end the terminal top flashes three times, approach a

magnet to the sensitive area to unlock and extract the terminal.

APC shows a suitable message to inform user if update is correctly completed

or an error has been occurred.

5.5 JOYA

– JOYA

CRADLE DISPENSER

CONNECTION

Joya Cradle Dispenser is equipped with an electrical-serial connection, used to

exhange command and response with Joya. The communications between the

terminal inserted into the slot and the slot itself, are performed by means of a

special “RPC like commad-response” protocol.