User's Manual

CONNECTIONS
15
2
2.3 RS232 CONNECTION
You can use a cable to directly connect the Datalogic Memor™ to a host
computer to transfer data through the RS232 interface.
Key:
A) Host Computer C) Datalogic Memor™
B) 94A051022 WIN-NET
(HRS ST40X-18S-CV)
The Single Cradle can be connected to the Host by any standard 9-pin serial
null-modem cable for RS232 communications.
Once the Host has been turned on, insert the Datalogic Memor™ mobile
computer into the cradle.
Key:
A) Host Computer C) Single Cradle
B) 94A051020 CAB-427
Null-Modem
D) *Power Supply (only necessary for
battery charging)
In this case the power supply is only necessary for battery charging. Insert the
power supply plug into the power jack on the base of the cradle and attach the
power supply to a power outlet.
CAUTION
If the mobile computer supports Windows Mobile, before plugging
the RS232 cable you have to check the 'COM1 Enable' option on
the 'System, Configuration' window. (Start -> Programs -> System
Configuration).
A
B
C
A
B
C
D