User's Manual

DATALOGIC MEMOR™

1 3

NOTE

By default, Bluetooth® is turned off. If you turn it on, and

then turn off your device, Bluetooth® also turns off. When

you turn on your device again, Bluetooth® turns on

automatically.

To create a Bluetooth® partnership between your device and another device

that has Bluetooth® capabilities, ensure that the two devices are turned on,

discoverable, and within close range.

2. Open the Bluetooth® control panel by tapping Start > Settings >

Connections tab > Bluetooth Manager.

1. Search for available Bluetooth® Devices by tapping the button for the type

of device you want (Printer, Serial or All) or tap Discovery to skip this step.

The Memor

will search for Bluetooth® Devices within range.

NOTE

If you attempt to set up a connection when the Bluetooth®

Radio is disabled, you will receive a message reminding

you that the radio is turned off, and asking you if you want

to turn it on. Tap Yes if you need to enable the Bluetooth®

Radio.

2. Once searching is complete, Bluetooth® Device Profiles will be displayed

in the Discovery tab. You can set up a connection to a device on the list, or

clear it from the list by tapping the Clear button: