User's Manual

USE AND FUNCTIONING

If the scan has taken place correctly:

- the Good Read LED gets constant Green for a configurable time;

- if enabled, the GoodReadSound emits an acoustic signal;

- if enabled, the GreenSpot projects a green spot onto the bar code image.

NOTE

Remove the protective film cover over the Laser Output

Window before use.

4.3.2 Imager Data Capture

The Elf™ Imager captures a picture of the entire bar code. The omni-directional

scanning does not require that the operator orient the bar code to align with the

scan pattern.

To read a 1D or 2D code, simply point the Elf™ Imager model onto the code

and press the SCAN Key.

The Elf™ Imager uses an intelligent aiming system pattern, similar to those on

cameras, indicating the field of view, which should be positioned over the code:

Aiming System