User's Manual

FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval
of Datalogic could void the authority to use the equipment.
This device has been tested and found to comply with the limits for a CLASS A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
FCC ID: U4G0020 for models with only 802.11b/g radio
FCC ID: U4G0053 for models with 802.11b/g radio and Bluetooth®
All 7XX-XXX WLAN models contain FCC ID TWG-SDCCF10G.
All 5XX-XXX WLAN models are not FCC certified (Datalogic Skorpio™ models only).
SAR COMPLIANCE
This product has been tested and found to comply with the following standards:
− OET BULLETIN 65 SUPPLEMENT C: evaluating compliance with FCC
guidelines for human exposure to radio frequency electromagnetic fields.
− Australian Radiation Protection And Nuclear Safety Agency (ARPANSA):
radiation protection series publication No. 3: maximum exposure levels to radio
frequency fields 3 KHz TO 300 GHz.
− EN 50392:2004: generic standard to demonstrate the compliance of electronic
and electrical apparatus with the basic restrictions related to human exposure to
electromagnetic fields (0 Hz- 300 GHZ).
INDUSTRY CANADA COMPLIANCE
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
The highest measured SAR level is 0.269 W/Kg
xv