User's Manual

DATALOGIC SKORPIO™/ SKORPIO-GUN™

3.8.5 Ethernet Settings

Windows CE Ethernet Cradle

Datalogic Skorpio™ can be connected to an Ethernet network by inserting it into the

Datalogic Skorpio™ Single Cradle Ethernet or into the Datalogic Skorpio™ Ethernet

Multi Cradle.

NOTE

Ethernet communication requires Datalogic Skorpio™ SW version

5.41 or later. Verify the software version by tapping on Software –

Version in the Datalogic default home page. Otherwise, search for

the file version.htm under the Windows folder.

When correctly inserted into the cradle, the Ethernet driver installed on the mobile

computer will automatically run, and using the DHCP service, will dynamically assign

the IP Address.

1. From the Datalogic Skorpio™ open Internet Explorer>Internet Options and

check use LAN no autodial then OK.

2. From the Datalogic Skorpio™ > Explorer, enter the IP address or the PC

name in the address bar. You may be required to enter your network

username and password. The LAN connection will take place and you will

be able to see the PC shared folders

and exchange files.

If your network provides Internet Service and does not use a proxy server you can

directly access the Internet. Otherwise set the internet proxy parameters according to

your network settings.