User's Manual

DATALOGIC JOYA™

1 5

Suggestion:

The cradle fixing blocks shown in the figures are mounted to the supporting

crosspieces under the Joya Cradle Dispensers. Their purpose is to prevent the

Joya Cradle Dispensers from falling inside the cabinet during the mounting

phase in which the Joya Cradle Dispensers may not be correctly positioned

before fixing them.

5.3.2 Joya

Cradle Dispenser Supports

Joya Cradle Dispensers are supported inside the Base Unit from crosspieces

fixed to the side panels of the cabinet. The front part of each Joya Cradle

Dispenser cover rests on the upper edge of its supporting crosspiece, while the

back part rests on two fixing blocks attached to the crosspiece above it.

Joya Cradle Dispenser is mounted to the cabinet using two screws that are

inserted into the holes provided towards the back of its cover and screwed into

the corresponding holes in the fixing blocks..

To correctly position Joya Cradle Dispensers, the supporting crosspieces and

the fixing blocks must be mounted according to the dimensional quotes and the

angles.