User's Manual

DATALOGIC JOYA™

1 5

Humidity: 90% non condensing

• Cabinet

The cabinet must not have any exposed sharp edges, which could represent a

danger to customers.

The requirements for air passages to cool both the JoyaCradle Dispensers and

the power supplies must be adhered to in order to avoid overheating problems

for the components inside the cabinet.

All components having dangerous voltage levels must be protected from

unauthorized access. Only qualified personnel should be authorized access for

maintenance purposes.

In particular, the opening at the top of the cabinet must be closed with a grill or

mesh that prevents access from the outside to the power supplies below. In

addition, the plastic protection covers must be mounted over the power supply

terminals to avoid accidental contact by maintenance personnel when the

cabinet is open.

• Wiring

The wires used for cabling must have flame retardant insulation.

The cables must be affixed to the cabinet avoiding types of cable clamps that

use screws or have moving parts that press directly upon the cable itself. Cable

clamps must also be applied close to the wires coming from the power supplies

so that they won't be accidentally pulled out of the power supply terminals to

which they are connected.

Avoid running cables with sharp bends or that rest on sharp edges which can

damage them over time and in the long run pose a danger inside the cabinet.

After making all the wiring connections, if some connections have wire exposed

without insulation, they must be insulated.

5.3.11 Connection to AC Line Voltage

If connection to the AC power line is made with a plug at the end of the cable,

The outlet to which it is inserted must be close by and easily accessible. The

outlet must also be rated for the maximum power consumption, which can be

considered equal to the nominal power of the connected power supplies.

If the Terminal Distributor is connected in a fixed electrical plant, a circuit

breaker must be provided in order to completely disconnect the AC line voltage

form the Cradle Dispenser cabinet. This circuit breaker must be positioned

close to the cabinet and be easily accessible. It must also be rated for the

maximum power consumption and must meet the Safety Normatives currently in

force.