User's Manual

Universal Product Code-A (UPC-A)
Code
Parameter
Description
I.D.#
Accept.
Input
Defaults Scanner Type
Min
Max
Factory
Laser
2D Imager
Lorax
Enter 1 for On and 0 for Off
Enable
Enables/disables the UPC-
A symbology.
0500 On or Off Off On On √ √ √
Enable
Aggressive
Decoding
Enables more aggressive
decoding algorithms to be
used in order to scan hard
to read labels.
0501 On or Off Off On Off √ √
Send
Check Digit
Includes check digit in the
label which is transmitted.
0502 On or Off Off On Off √ √ √
Send System
Digit
Includes the system digit in
the label transmission. For
UPC-A, the system digit is
always zero.
0503 On or Off Off On On √ √ √
Convert
UPC-A to
EAN-13
Instructs the decoder to
expand UPC-A labels to
their EAN-13 equivalents.
Any EAN-13 parameters
will then apply to the result.
0504 On or Off Off On Off √ √ √
Read
Verification
Sets the number of times a
label must be read before
it is transmitted.
0520 01 - 04 01 02 01 √
User ID
Specifies the symbology
identifier (if any) that is
sent when parameter Send
Code ID (Index 0025) is
set to 3. ASCII code zero
(null) is used to indicate
that an identifier is not to
be sent for the symbology.
0521
Any
single
ASCII
character
(00 = Off)
‘A’ ‘A’ ‘A’ √ √ √