User's Manual
Interleaved 2 of 5
Code
Parameter
Description
I.D.#
Accept.
Input
Defaults Scanner Type
Min
Max
Factory
Laser
2D Imager
Lorax
Enter 1 for On and 0 for Off
Enable
Enables/ disables the
Interleaved 2 of 5
symbology.
0210 On or Off Off On On √ √ √
Enable
Aggressive
Decoding
Enables more aggressive
decoding algorithms to be
used in order to scan hard
to read labels.
0211 On or Off Off On Off √
Enable
Checksum
Requires the use of
checksum characters to
verify a bar code.
0212 On or Off Off Off Off √ √ √
Send
Checksum
Instructs the terminal to
include the checksum in
the label transmission.
0213 On or Off Off Off Off √ √ √
Enable Case
Code
Restricts Interleaved 2 of 5
label lengths to only 6 and
14 data characters.
Enabling this parameter
overrides the minimum and
maximum length values.
0214 On or Off Off Off Off √ √ √
Minimum
Label
Length
Set the minimum label
length to be less than or
equal to maximum label
length.
0228 02 - 50 02 02 06 √ √ √
Maximum
Label
Length
This feature specifies the
maximum allowable length
of an Interleaved 2 of 5
label.
The length includes check
and data characters.
Maximum Label Length
should be greater than or
equal to Minimum Label
Length.
0229 02 - 50 02 50 10 √ √ √
Read
Verification
Sets the number of times a
label must be read before
it is transmitted.
022A 01 - 04 01 02 01 √ √