User's Manual

Composite
Code
Parameter
Description
I.D.#
Accept.
Input
Defaults
Scanner
Type
Min
Max
Factory
2D Imager
Enter 1 for On and 0 for Off
Composite
Enable
Enables/disables the
Composite symbology.
0A10 On or Off Off On Off √
Composite to
UCC/EAN-128
Instructs the decoder to
transmit the label data as
one or more UCC-128
labels. The transmission
will use the UCC-128 AIM
identifier.
0A14 On or Off Off Off Off √
Composite
Minimum
Set the minimum bar code
label length to be less
than or equal to maximum
label length.
0A28 1-2435 1 2435 1 √
Composite
Maximum
This feature specifies the
maximum allowable length
of a label. The length
includes check and data
characters, if applicable.
Maximum Label Length
should be greater than or
equal to Minimum Label
Length.
0A29 1-2435 1 2435 2435 √
Composite
User ID
Specifies the symbology
identifier (if any) that is
sent when parameter
Send Code ID (Index
0025) is set to 3. ASCII
code zero (null) is used to
indicate that an identifier
is not to be sent for the
symbology.
0A2B
Any
single
ASCII
character
(00 = Off)
‘b’ ‘b’ ‘b’ √
NOTE: For the 2D Imager, GS1 DataBar -Expanded User Code ID is used for Composite.