User's Manual

Table Of Contents

1.3.2 Imager Data Capture

The Lynx Imager captures a picture of the entire bar code. The omni-directional

scanning does not require that the operator orient the bar code to align with the scan

pattern.

To read a 1D or 2D code, simply point the Lynx Imager model onto the code and

press the SCAN Key.

The Lynx Imager uses an intelligent aiming system pattern, similar to those on

cameras, indicating the field of view, which should be positioned over the code:

Aiming System

If the aiming system pattern is centered over the entire symbology as shown in the

following figure, either wait for the timeout or release the Scan key to capture the

image.

A red beam illuminates the code, which is captured and decoded. You will get a good

read.