Datasheet

Datalogic Memor™ Multi-Battery Charger
Figure 1
The Datalogic Memor™ Multi-Battery Charger, with its 4 slots,
allows you to charge the Datalogic Memor™ battery packs.
The Datalogic Memor™ Multi-Battery Charger is compatible
with the following batteries:
− 94ACC1325 Dl-Memor Large Capacity Battery,
ETI CA Battery Inc. P/N BP08-00012A, 3.7V@2000mAh
TYP
− 94ACC1326 Dl-Memor Standard Battery,
ETI CA Battery Inc. P/N BP08-00011A, 3.7V@1100mAh
TYP
− 94ACC1367 Dl-Memor Large Capacity Battery Cvr2,
ETI CA Battery Inc. P/N BP08-000610, 3.7V@2000mAh
TYP
− 94ACC1368 Dl-Memor Standard Battery Cvr2,
ETI CA Battery Inc. P/N BP08-000600, 3.7V@1100mAh
TYP
CAUTION
Annual replacement of rechargeable battery
pack avoids possible risks or abnormalities and
ensures maximum performance.
822000921 (Rev. A)
SET UP AND USE
Plug the power supply into the connector positioned on the
Datalogic Memor™ Multi-Battery Charger base. Then plug the
power supply into a socket.
Figure 2
Insert the battery pack into one of the free slots with the battery
contacts oriented toward the charger back by simply pressing
downward until the battery snaps in place.
Figure 3
NOTE
The Datalogic Memor™ Multi-Battery Charger
could get warm during charging, this is normal
and does not mean a malfunction.
WARNING
Installing, charging and/or any other action
should be done by authorized personnel and
following this manual.
The battery pack may get hot, explode, ignite,
and/or cause serious injury if exposed to
abusive conditions.
If the battery pack is replaced with an improper
type, there is risk of explosion.
Do not place the battery pack in or near a fire or
heat; do not place the battery pack in direct
sunlight, or use or store the battery pack inside
unventilated areas in hot weather; do not place
the battery pack in microwave ovens, dryer,
high pressure containers, on induction
cookware or similar device. Doing so may
cause the battery pack to generate heat,
explode or ignite. Using the battery pack in this
manner may also result in a loss of
performance and a shortened life expectancy.
Use only a Datalogic Mobile approved power
supply. The use of an alternative power supply
will void the product warranty, may cause
product damage and may cause heat, explode
or ignite.
The area in which the units are charged should
be clear of debris and combustible materials or
chemicals.
Immediately discontinue use of the battery pack
if, while using, charging or storing the battery
pack, the battery pack emits an unusual smell,
feels hot, changes colour or shape, or appears
abnormal in any other way.
Do not short-circuit the battery pack contacts
connecting the positive terminal and negative
terminal. This might happen, for example, when
you carry a spare battery pack in your pocket or
purse; accidental short–circuiting can occur
when a metallic object such as a coin, clip, or
pen causes direct connection of the contacts of
the battery pack (these look like metal strips on
the battery pack). Short–circuiting the terminals
may damage the battery pack or the connecting
object.
Power on
Battery Charging
State
LED
s