Spec Sheet

TECHNICAL DATA
Power supply 10 … 30 Vdc (limit values)
Ripple 2 Vpp max.
Consumption (output current excluded)
40 mA max. at 24 Vdc (mod. TL46-A)
50 mA max. at 24 Vdc (mod. TL46-W/WJ)
85 mA max. at 24 Vdc 24 Vdc with bargraph ON in threshold adjustment mode,
55 mA max at 24 Vdc with bargraph OFF in normal functioning mode (mod. TL46-WL)
35 mA max. at 24 Vdc (mod. TL46-WLF/WE)
Light emission
white LED 400-700 nm (mod. TL46-A-4xx)
red LED 630 nm (mod. TL46-A-6xx)
blu LED 465nm/green LED 520 nm/red LED 630 nm (mod. TL46-W/WL/WLF/WE/WJ)
Detection Distance
9 ±3 mm
18 mm (Lens No.18 glass)
22 mm (Lens No.22 glass)
28 mm (Lens No.28 glass)
40 mm (Lens No.40 glass)
Minimum spot dimension
1,5 x 5 mm
0,8x4mm (TL46-WJ)
Depth of field ± 3 mm
Response time
100 μs (mod. TL46-WE color mode)
33 μs (mod. TL46-W)
25 μs (mod. TL46-A/WL)
16 μs (mod. TL46-WLF/WE contrast mode)
10 μs (mod. TL46-WJ)
Switching frequency
10 kHz (mod. TL46-WE color mode)
15 kHz (mod. TL46-W)
20 kHz (mod. TL46-A/WL)
30 kHz (mod. TL46-WLF/WE contrast mode)
50 kHz (mod. TL46-WJ)
Jitter
< 7μs (TL46-WJ)
16μs (TL46-WLF/WE contrast mode)
>25μs (TL46-W/WL)
Setting
SET push-buttons (mod. TL46-W/WL/WLF/WE)
sensivity trimmer (mod. TL46-A)
Operating mode
DARK/LIGHT selection by switch (mod. TL46-A)
automatic DARK/LIGHT selection (mod. TL46-W/WL/WJ)
automatic DARK/LIGHT selection in the target/background detection, selectable via wire in the dynamic
detection (mod. TL46-WLF/WE)
Indicators
yellow OUTPUT LED
green READY LED, orange DELAY LED and KEYLOCK (Mod TL46-W/WJ)
green READY LED, 4-digit display/DELAY LED/KEYLOCK LED (mod. TL46-WLF/WE)
orange ARROWS (mod. TL46-A), DELAY LED and KEYLOCK LED 5-segment bargraph (mod. TL46-WL)
Dark/light selection
Switch
Automatic
Automatic/manual; remote/dynamic
Delay
0…20ms selectable via delay input
0…100ms programmed
Auxiliary function
Keylock (not available on TL46-WE)
Fine Hysteresis regulation (TL46-WL/WLF/WE)
Output
PNP (mod. TL46-WJ); PNP or NPN; PNP/NPN (mod. TL46-W/WL/WLF/WE by part number); analog output
(mod. TL46-A/W/WL)
Output current 100mA
Saturaton Voltage =<2V
Analogue Out
0,5…5,5V ±10%; 2V on white target 90%
1…3V ±10%(white 90%) ; 5,5V max
Analogue out impedance 2,2 kΩ (short circuit protection)
Connection M12 5-pole connector
Dielectric strength 500 Vac, 1 min between electronics and housing
Insulating resistance >20 MΩ, 500 Vdc between electronics and housing
Electrical protection class 2, double insulation
Protection device Reverse polarity protection, overload and short circuit protection
Mechanical protection IP67
Ambient light rejection according to EN 60947-5-2
Vibrations 0,5 mm amplitude, 10 … 55 Hz frequency, for every axis (EN60068-2-6)
Shock resistance 11 ms (30 G) 6 shock for every axis (EN60068-2-27)
Housing material aluminium
Lens material mirror (mod. TL46-A), glass (mod. TL46-W/WL/WLF/WJ/WE)
Operating temperature -10 … 55 °C
Storage temperature '-20 … 70 °C
Weight 170 g max.
SENSORS
www.datalogic.com
Contrast Sensors - TL46