Technical information

AccuLazr™ AL5010 Product Line Manual Operations 93
7. Run the browser-based setup application and establish a connection
with the reader.
8. Go to the Diagnostics > AL5010 Monitor.
9. During operations, use the AL5010 Monitor to confirm the reader’s
status, read quality, code quality, and messages via the on-screen
indicators. (See Chapter 8, Diagnostics.)
10. Close the connection to the reader.
11. Disconnect setup cable.
Operations Checklist
 Check trigger photoeye LED for proper operation.
 Test parameters to assure optimal operation.
 Observe the reader’s Status Indicator LEDs during power-up.
(What to watch for is outlined on page 95.)
 Select Diagnostics > AL5010 Monitor.
 Pass test label in scanning beam.
 Adjust mounting as needed for optimal performance.
 Modify AL5010 parameters as needed for optimal performance.
 Save parameters to scan head.
 Backup parameters from scan head to mounting base.
 Backup parameters to disk (optional, but recommended).
06-AL5010_Operations_R20.doc Accu-Sort Systems, Inc.