Technical information

110 Maintenance AccuLazr™ AL5010 Product Line Manual
Cleaning the Trigger Photoeye
If your application uses the photoeye option as a hardware trigger, be sure to
clean the photoeye periodically as outlined below.
1. Turn off the product transport.
2. Turn off the reader’s lasers.
3. Clean the photoeye’s lens using the denatured alcohol solution and a
cotton swab or lens paper. Check the reflector on the opposite side of
the transport.
Clean as necessary.
4. Verify photoeye operation.
Accu-Sort Systems, Inc. 07-AL5010_Maintenance_R20.doc