Technical information

AccuLazr™ AL5010 Product Line Manual Troubleshooting 113
8 Troubleshooting
This chapter provides instructions for diagnosing, troubleshooting and
correcting AccuLazr AL5010 performance issues. It provides specific
information on:
 Test Mode
 Indicators
 Diagnostics
 Troubleshooting (Problem/Cause/Solution)
Test Mode
In test mode, the AL5010 displays the read rate on the AL5010 control
panel’s bar graph LEDs. The Diagnostics > Monitor window also provides a
read quality bar graph that enables you to monitor the test mode remotely
from a PC connected to your network. Additional details can be obtained by
monitoring from this diagnostic window while the reader is in test mode.
NOTE: Test mode will continue running until you click Stop Test Mode on
the Monitor screen or press the button on the back of the reader.
Status Indicators
The AccuLazr AL5010 provides several status indicators that you can use to
troubleshooting performance during operations. They are found at two
locations:
 Control Panel
 Diagnostics > Monitor screen
08-AL5010_Troubleshooting_R20.doc Accu-Sort Systems, Inc.