Technical information

120 Troubleshooting AccuLazr™ AL5010 Product Line Manual
Log Viewer
The Diagnostics > Log Viewer lets you review the performance logs saved
by the AL5010. The log view field remains empty until you select one of the
three most common logs (Read Rate, System Counters, or Message Log)
via the buttons or enter a log request in the Command field.
Log Viewer Commands
There are several commands that you can use to display AL5010
parameters and diagnostic information. Commands can be sent from the
Command field on the log viewer. Commands may also be sent from a
terminal interface, such as a TELNET connection to the AL5010.
Log Viewer Command Descriptions
Display
Commands
Description
DISP COUNTERS
Display the System Counter log view.
DISP ENET Display the Ethernet interface status including MAC address.
DISP LASERS Display ALL Lasers log view.
DISP LASERx Display one Laser log view, where X is 1 – 2.
DISP MSGLOG
Display the Message log view.
DISP READRATE
Display the Read Rate log view.
Other Commands Description
CLEAR ALL Clears all information from the Message Monitor.
NOTE: All commands can be issued from the Command field. However,
when entering a command in the field, spaces are NOT permitted. As a
result, the display commands need to be entered without a space (i.e.,
DISPCOUNTERS, DISPMSGLOG, etc.)
NOTE: Right-click on log view provides two options: Save LogView to File
(also available from Tools) and Copy to Clipboard.
Accu-Sort Systems, Inc. 08-AL5010_Troubleshooting_R20.doc