Technical information

AccuLazr
™
AL5010 Product Line Manuals Safety 7
2 Safety
Please follow the safety precautions and warnings found in this manual when
installing, setting up, operating, maintaining, troubleshooting or replacing any
Accu-Sort products, parts, or related equipment. Following these precautions
will prevent personal injury or damage to the unit. Failure to follow these
precautions may also void your warranty.
This section provides important information regarding safety and your
AL5010, especially involving issues regarding:
 General Precautions during Mounting and Installation
 Compliance Requirements
 Electrical Safety
 Electrical Grounding Requirements
 Electrostatic Discharge Precautions and Control
 Laser Safety
Contact Accu-Sort at 1-800-BAR-CODE™ if you need more information.
Symbols
Throughout this manual, special safety alerts are indicated by the following
symbols:
WARNINGS or CAUTIONS: This symbol identifies a hazard or
procedure that, if incorrectly performed, could cause personal injury or
result in equipment damage.
HIGH VOLTAGE CAUTION: This symbol alerts the user they are about
to perform an action involving, either a dangerous level of voltage, or to
warn against an action that could result in damage to devices or electrical
shock.
LASER CAUTION: This symbol alerts the user they are about to perform
an action involving possible exposure to laser light radiation.
ESD CAUTION: This symbol identifies a procedure that requires you take
measures to prevent Electrostatic Discharge (ESD) e.g., use an ESD wrist
strap. Circuit boards are most at risk. Please follow ESD procedures.
Alerts help you to:
 Identify a hazard and its consequences
 Avoid a hazard by taking adequate safety precautions
 Get the most out of your bar code solution
02-AL5010_Safety_R20.doc Accu-Sort Systems, Inc.