Technical information

AccuLazr
™
AL5010 Product Line Manual Appendix C: AccuLazr™ User Interface 151
Modify Settings > Configuration
Modify > Configuration Descriptions
Selection Definition
Reader Name – User-defined reader name (up to 15 characters).
Useful when it is necessary to identify multiple AL5010 readers
within the same building or application.
Reader Model – Displays the model of the reader (AL5010-IL,
AL5010-2L, etc.).
Serial Number – Displays the serial number of the reader.
Software Name/Revision – Displays the installed software name
and revision number.
Decode Software Name/Revision – Displays the installed decode
software name and revision number.
Reader
Information
FPGA Device Id/Revision – Displays the FPGA (field-
programmable gate array) device name and revision number.
Scan Rate (600-1200) – Allows you to change the scan rate.
WARNING: Modifying the scan rate from the
factory setting can adversely affect the AL5010
performance.
NOTE: Changing scan rate and then saving
parameters causes the AL5010 to reboot.
Field of View (2-54 degrees) – The field of view may be defined
within stated parameters.
Configuration
Options
Enabled Trigger/Track Controlled Laser – Enabling this function
results in the following
:
• Non-Tracking: Lasers turn off whenever "trigger" is not
active.
• Tracking: Lasers turn off whenever the belt speed is zero or
a package has not been detected for two minutes.
A3-AL5010_User Interface_R20.doc Accu-Sort Systems, Inc.