Technical information

8 Safety AccuLazr
™
AL5010 Product Line Manuals
General Precautions
Installation and Service by Qualified Service Technician Only
WARNING: All procedures involving exposure to the inside of the
AL5010 Interface Module must be performed by a trained
technician because of possible exposure to emitted laser radiation,
high voltage, and could reduce the effectiveness of the device’s IP
rating. There are no user-serviceable parts inside. Do not attempt
to open the unit or perform any installation/service procedures
unless you are a trained technician! DO NOT REMOVE the
faceplate from the scan head enclosure. Opening the AL5010 will
void the factory warranty.
Refer all servicing and advanced troubleshooting to a qualified service
technician. Technical training is available from Accu-Sort Systems.
Furthermore, even trained technicians should always reference the specific
product documentation for more detailed service procedures that may not be
described in the AL5010 Product Manual.
Unpacking, Mounting and Installation Recommendations
CAUTION: Firmly fasten mounting structures in place before installing the
equipment to any mounting structure. Avoid using freestanding mounting
structures. If your application requires a freestanding mounting structure,
avoid making the structure top-heavy.
 Follow all procedures regarding electrical safety, laser safety, and
electrostatic discharge safety (ESD) as outlined in this manual.
 Save all packing material in case you have to transport your readers.
 Use steel or aluminum as a mounting structure. An Accu-Sort mounting
structure is recommended for optimum system performance.
 Check mounting hardware periodically for tightness and stability.
 Do not use sheet rock, plaster board, wood, or other unstable mounting
surfaces.
 Do not use mounting surfaces that are subject to high vibrations.
 Do not create any obstructions of airflow around the modules. Keep the
area around the modules clean to provide for cooling. (Refer to specific
product manuals for minimum clearances.)
 Avoid dropping the readers during unpacking and installation.
 Do not touch the window glass of the scan head.
Accu-Sort Systems, Inc. 02-AL5010_Safety_R20.doc