Technical information

AccuLazr
™
AL5010 Product Line Manual Appendix C: AccuLazr™ User Interface 169
• None: Nothing is sent for a no-read
• Repeat Character: Tthe specified “repeated character” is
sent.
• User Defined: A user specified message is sent.
Multiple Bar Code – Select None, Repeat Character, or User
Defined from the drop-down list.
• None: A multiple bar code condition will be reported as a
“Read” of the first bar code reported.
• Repeat Character: The specified “repeated character” is
sent.
• User Defined: A user specified message.
Match - Select None, Send Bar Code, or User Defined from
the drop-down list.
• None: If the bar code matches any of the match codes, no
message is sent.
• Send Bar Code: The bar code is sent.
• User Defined: A user specified message is sent.
No Match – Select None, Repeat Character, or User Defined
from the drop-down list.
• None: If the bar code does not match any of the match
codes (or was a no-read), no message is sent.
• Repeat Character: The specified “repeated character” is
sent.
• User Defined: A user specified message.
No Match Read – Select None, Send Bar Code, or User
Defined from the drop-down list.
• None: if a valid bar code was read but it does not match
any of the match codes, no message is sent.
• Send Bar Code: The bar code is sent.
• User Defined: A user specified message is sent.
Append QQ (code quality) to message – When enabled, a two
digit “code quality” indication (number from 00 to 99) is
appended to the bar code message. The code quality value is
separated from the message with the specified separator.
Append Distance to message – When enabled, the approximate
distance to the bar code can be appended to the bar code
message. The distance data is separated from the message
with the specified separator.
Heart Beat Message – When enabled, if no other message is
sent for the time period specified in Heart Beat Time Out, the
specified heart beat message string is sent. A time-out of zero
(0) disables the heart beat message.
Heart Beat Time Out (0-30,000 ms) – 0 = Disable Heart Beat
Message, 1-30,000 = Delay before sending Heart Beat
Message.
Modify Settings > Trigger
There are three options for trigger source:
A3-AL5010_User Interface_R20.doc Accu-Sort Systems, Inc.