Technical information

208 Appendix E: FAST Monitor Configuration AccuLazr™ AL5010 Product Line Manual
2. Open Modify Settings > FAST Monitor
a. Enter a name for the tunnel in the Tunnel Name field.
b. Select a reader position from the Reader Position drop-down list.
c. Enter the FAST Monitor port number in the Port No. field (always
9899) and the FAST Monitor IP address in the Remote IP Addr. field.
d. Click Update and then click the save icon.
3. Set up FAST Monitor (refer to the FAST Monitor documentation for setup
information.)
NOTE: If multiple units are being used in a network
connection, see the Controller/Client section for
configuration
Accu-Sort Systems, Inc. A5-AL5010_FAST_Monitor_Configuration_R20.doc