Technical information

95 3.74
110 4.33
38.1 1 1/2"
17.5 .69
45°
14.8 .58
MOUNTING SLOTS FOR
M5[#10] HARDWARE
MOUNTING HOLE FOR
5/16 T-STUD
35 1.38
22 .87
99.5 3.92
62 2.44
39.5 1.56
28.5 1.12
143.3 5.64
23.6 .93
READ DISTANCE
REFERENCE POINT
PITCH 15
SKEW
+150
/-8
TILT
SEE NOTE 1
NOTES:
1) TILT: MOUNTED WITH ARC SLOTS:
22.5
MOUNTED WITH CENTER HOLE:
180
2) MOUNTING HARDWARE (INCLUDED WITH UNIVERSAL MOUNTING BRACKET):
2X M5 SCREW, WASHER AND Z-NUT FOR EXTRUSION MOUNTING (SHOWN)
2X #10 SELF-DRILLING SCREW FOR SURFACE MOUNTING (NOT SHOWN)
1X 5/16-18 T-STUD AND FLANGED BUT FOR EXTRUSION MOUNTING WITH
180 ROTATION
REFERENCE DRAWINGS
111584 MECHANICAL SPECIFICATIONS
111407 EXPLODED PARTS DIAGRAM
N/A
N/A
N/A
AL5010
INSTALLATION DRAWING
R
111585
DWG. NO.
53830
CAGE CODE
1 OF 2
SOLIDWORKS
NONE
CAD SYS.
DATE
C
SIZE
DATE
DATE
MECH ENG
01.31.08
01.31.08
DRAWN
CHKD
ENGR
DEPT.
CUSTOMER
TJB
TJB
E-
SCALE
CONTRACT #
TELFORD, PA 18969 USA
ACCU-SORT SYSTEMS, inc.
D
1
C
2
B
A
1 2
3 4
D
C
3
B
4
A
SHEET
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS[INCHES]
ALL ANGLES ARE 90°
REMOVE BURRS AND SHARP EDGES
[INCH]
[.X±.1000]
[.XX±.0200]
[.XXX±.0050]
[.XXXX±.0005]
ANGULAR
X±1.00°
.X±0.10°
.XX±0.01°
--
PART NO.
C
STAMPED "CONTROLLED COPY" IN RED
THIS IS NOT A CONTROLLED COPY UNLESS
2007, ACCU-SORT SYSTEMS, INC.
OF THIS DOCUMENT.
APPEAR ON ANY COPY OR REPRODUCTION
PRIOR APPROVAL. THIS NOTICE MUST
SPECIFIC PURPOSE, WITHOUT ACCU-SORT'S
OR REPRODUCED, EXCEPT FOR THE
IT MAY NOT BE DISCLOSED, COPIED,
INFORMATION REMAINS OUR PROPERTY.
SPECIFIC PURPOSE AND THE DISCLOSED
THIS DOCUMENT IS PROVIDED FOR A
REVISION
BY
TJB
CHANGE
DATE
10FEB2011 ECO 11-65, REVISED AS SHOWN 2
REV
METRIC
TOLERANCES:
METRIC
X±2.500
.X±0.500
.XX±0.130
.XXX±0.013