Technical information

10
40
50
60
70
PHOTOEYE MOUNTING HOLE
REF. 1.5" X 3.0" EXTRUSION (2)
REF. PHOTOEYE
20
20
N/A
N/A
N/A
A
B
C
D
B
4 3 1 2
4
C
PHOTOEYE
KIT, MOUNTING, REFLECTOR
R
41222
DWG. NO.
53830
CAGE CODE
1 OF 1
SOLIDWORKS
NONE
CAD SYS.
DATE
B
SIZE
DATE
DATE
MECH ENG
XX.XX.XX
XX.XX.XX
01/16/09
DRAWN
CHKD
ENGR
DEPT.
CUSTOMER
AS
XXX
AS
E-
SCALE
CONTRACT #
TELFORD, PA 18969 USA
ACCU-SORT SYSTEMS, inc.
D
C
A
1 2 3
PART NO.
1000020589
SHEET
REMOVE SHARP EDGES AND BURRS
THIS IS NOT A CONTROLLED COPY UNLESS
STAMPED “CONTROLLED COPY” IN RED
THIS DOCUMENT IS PROVIDED FOR A
SPECIFIC PURPOSE AND THE DISCLOSED
INFORMATION REMAINS OUR PROPERTY.
IT MAY NOT BE DISCLOSED, COPIED,
OR REPRODUCED, EXCEPT FOR THE
SPECIFIC PURPOSE, WITHOUT ACCU-SORT’S
PRIOR APPROVAL. THIS NOTICE MUST
APPEAR ON ANY COPY OR REPRODUCTION
OF THIS DOCUMENT.
2007 ACCU-SORT SYSTEMS, INC.
FT.,IN ±1"
FRACTIONS ±1/4
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES [MILLIMETERS]
ALL ANGLES ARE 90°
ALL C-CINKS ARE 82° INCLUDED ANGLE
ALL BEND RELIEFS TO SUIT
TOLERANCES:
INCH
.X±.1000
.XX±.0200
.XXX±.0050
.XXXX±.0005
[METRIC]
[X±2.500]
[.X±0.500]
[.XX±0.130]
[.XXX±0.013]
ANGULAR
X±1.00°
.X±0.10°
.XX±0.01°
REVISION
BY
AS
CHANGE
DATE
02/17/10
ECO 10-3
REV
05