Technical information

FERRITE INSTALLATION AND LOCATION
SEE NOTE 3
ASSEMBLED VIEW
SEE NOTE 2
FOR POSITIONING INFO.
NOTES:
1) ATTACH OPPOSITE END OF GROUND WIRE TO CONVEYOR
ESTABLISHING EARTH GROUND USING (1) #6-32 SCREW,
(1) #6 HEX NUT, AND (1) #6 LOCKWASHER SUPPLIED.
2) INSTALL BRUSH TOUCHING CONVEYOR NO MORE THAN
1/8" FROM BELT.
3) CABLE TO WRAP AROUND FERRITE A MINIMUM OF 6 TIMES
AS SHOWN.
N/A
N/A
N/A
INSTALLATION
ASSEMBLY, BRUSH, ANTI-STATIC
R
102974
DWG. NO.
53830
CAGE CODE
2 OF 2
SOLIDWORKS
NONE
CAD SYS.
DATE
C
SIZE
DATE
DATE
MECH ENG
XX.XX.XX
04/25/01
08/26/09
DRAWN
CHKD
ENGR
DEPT.
CUSTOMER
AS
XXX
DJK
E-
SCALE
CONTRACT #
TELFORD, PA 18969 USA
ACCU-SORT SYSTEMS, inc.
D
1
C
2
B
A
1 2
3 4
D
C
3
B
4
A
SHEET
REMOVE SHARP EDGES AND BURRS
FT.,IN ±1"
FRACTIONS ±1/4
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES [MILLIMETERS]
ALL ANGLES ARE 90°
ALL C-CINKS ARE 82° INCLUDED ANGLE
ALL BEND RELIEFS TO SUIT
TOLERANCES:
INCH
.X±.1000
.XX±.0200
.XXX±.0050
.XXXX±.0005
[METRIC]
[X±2.500]
[.X±0.500]
[.XX±0.130]
[.XXX±0.013]
ANGULAR
X±1.00°
.X±0.10°
.XX±0.01°
0102974000
PART NO.
C
STAMPED "CONTROLLED COPY" IN RED
THIS IS NOT A CONTROLLED COPY UNLESS
2004, ACCU-SORT SYSTEMS, INC.
OF THIS DOCUMENT.
APPEAR ON ANY COPY OR REPRODUCTION
PRIOR APPROVAL. THIS NOTICE MUST
SPECIFIC PURPOSE, WITHOUT ACCU-SORT'S
OR REPRODUCED, EXCEPT FOR THE
IT MAY NOT BE DISCLOSED, COPIED,
INFORMATION REMAINS OUR PROPERTY.
SPECIFIC PURPOSE AND THE DISCLOSED
THIS DOCUMENT IS PROVIDED FOR A
05
REVISION