Technical information

AccuLazr
™
AL5010 Product Line Manuals Mechanical Installation 15
Installation Sequence
NOTE: Everything should be MECHANICALLY INSTALLED before
performing any ELECTRICAL INSTALLATION. Reference Chapter 4 for
electrical installation details.
Installing a Single Unit
To install a single unit, follow this sequence of steps:
 Complete mechanical installation.
 Review the details of your application’s requirements.
 Determine and mark the reader mounting location.
 Erect mounting frame or other supporting structures.
 Attach the Universal Mounting Bracket (UMB) to the frame.
(UMB and mounting frame options are available from Accu-Sort.)
 Install the mounting base to the UMB (or frame, if UMB not used).
 Mount the AccuLazr Basic or Enhanced Interface Module to
structure.
 Mount the Accu-Sort power supply to structure.
 Mount Trigger Photoeye (optional).
 Mount tachometer (Enhanced Interface Module only).
 Complete electrical installation.
 Install the scan head to the mounting base and wire interface
module. (See Chapter 4.)
NOTE: To reduce the possibility of damage to the scan head, install it after
the mounting base is mounted, wired, and all wiring checked for accuracy.
 Setup your reader.
 See Chapter 5.
 Check operations.
 See Chapter 6.
Installing multiple units
To mechanically install multiple units, follow the same sequence of steps, per
reader, as defined in Installing a Single Unit. Your application will define how
the mounting requirements vary for each reader.
Multiple-reader networks may require a different approach to physical
location of the power source, trigger photoeye, and tachometer since they
are most likely being shared by the group of readers.
03-AL5010_Mechanical_Installation_R20.doc Accu-Sort Systems, Inc.